Small package, low-cost BLDC diver board fully compatible with the simplefoc library

无刷电机矢量驱动板

A powerful Arduino shield for running BLDC motors using the FOC algorithm

3-phase driver for bldc motor, based on stm32 and l6234.

无刷小风扇

FOC driver board based on Qfplib-m3 and STM32F103C8T6 with algorithm. Use torque, velocity and angle control. Several applications based on torque control have been realized.

PMSM/BLDC motor controller/driver PCBs

Arduino code for the STEVAL-GMBL02V1 BLDC motorcontroller, using SimpleFOC to modulate the motors

Driverino-Shield is an Arduino based simple, low power controller for PM BLDC sensored motors.

iFOC - High Performance Field Oriented Control System, whose 'i' stands for Intelligent, Integrated and Instant.

Sensorless driver of BLDC and PMSM motors based on DRV10987 controller.

Single and Two-wheel driver objects P2 Spin2/Pasm2 for our 6.5" Hub Motors with Universal Motor Driver Board

Design and implement a control system that can be used to regulate the speed and direction of a Brushless DC (BLDC) motor using an Electronic Speed Controller (ESC), and control the angle of a Cyclic Collective Pitch Mixing (CCPM) mechanism using a CCPM controller

BLDC motor driver based on Arduino Micro Pro and TI MCT8316ZR

Welcome to the Home of the VESC Open Source Project!

A high power BLDC motor actuator with cycloidal drive for robotic joints

HYW FOC|何易位FOC：结构化、易移植、高度自定义化的高性能(?)无刷电机FOC库

This is a short documentation on how to burn an Arduino bootloader to the BGC3.0 clone to use it for anything but the original gimbal application.

ESC for BLDC motors for UAVs with I2C interface

Kevinbot Core Firmware