0.15.1

What's Changed

• nrf52: Add basic clocks hal by @Grazfather in #666
• rp2xxx: fix incorrect parameter in define name comparison by @wordandahalf in #671
• Fix incorrect calculation for get_readable_len in CircularBuffer by @luke-thom in #678
• esp: Add app description by @tact1m4n3 in #674
• esp: LEDC and refactoring by @tact1m4n3 in #676
• rp2xxx: Add system timer hal by @tact1m4n3 in #673
• Update RTT to new std.Io interfaces by @haydenridd in #675
• Remove Leftover Debug Logging by @haydenridd in #686
• nrf52: Add rtt example by @Grazfather in #689
• Aviron: Fix a few instructions by @Grazfather in #688
• fix(esp32-c3): fix typo "Defalut" by @CorruptedVor in #685
• STM32F1 Time Driver by @RecursiveError in #681
• uf2: Refactor and Archive.read_from by @tact1m4n3 in #690
• rp2xxx: Remove redundant flashless board file for pico by @tact1m4n3 in #691
• Migrate boxzer and dependencies by @mattnite in #695
• Try to fix local server by @mattnite in #696
• CircularBuffer fn get_readable_len did not account for full case by @Kytezign in #697
• Update cdc.zig with line state tracking by @Kytezign in #698
• Ensure RP2040 tx buffer control is respected by @Kytezign in #699
• Aviron: Add breakpoint, set gas, detect infinite loop by @Grazfather in #703
• rp2xxx: Implement flashless flash hal by @tact1m4n3 in #705
• RP2040 ADC handle the 500Khz sampling case by @Kytezign in #706
• rp2040 pio: Fix absolute addressing of jmp and wrap by @Kytezign in #700
• update Stream_Device IO and STM32 uart by @RecursiveError in #702
• adding some polish by @aaronhmiller in #709
• Unify interface, add memory mapping by @Grazfather in #704
• Fix semihosting writer by @Grazfather in #692
• Moved scripts out of rpi examples folder by @haydenridd in #711
• nrf5x: i2cdma: Don't return TargetAddressReserved by @Grazfather in #712
• Rework DMA in STM32F1 hal by @RecursiveError in #708
• Aviron: cleanup names and fix avr-gcc test by @Grazfather in #714
• Aviron: Dump regs and sram if trace is set by @Grazfather in #715
• Aviron: Support multiple MCUs by @Grazfather in #683
• "Regz Wizard" -> Sorcerer by @mattnite in #716
• Aviron: Add tests for load instructions by @Grazfather in #718
• Aviron: Make test elf builds deterministics by @Grazfather in #719
• Aviron: Return errors on memory/flash access error and instruction decode by @Grazfather in #720
• Aviron: Fix IO ranges for MCUs and explain in comments by @Grazfather in #723
• Update/cortex m7 support by @brbrr in #721
• Add Support for Multiple CDC Drivers by @eugenepentland in #722
• Drivers: AS5600 position sensor by @Grazfather in #713
• Added GPIO IRQ RP2040/RP3050 by @Kytezign in #725
• Aviron: Fix SBIW instruction setting SREG incorrectly by @Grazfather in #724
• rp2xxx: Enable fpu and dcp in core 1 entrypoint by @tact1m4n3 in #726
• Interrupt and multicore safe allocator by @Uthedris in #469
• Fixes for RP2xxx SPI Device and ESP32-C3 build error by @tact1m4n3 in #732
• rp2xxx: ssd1306 oled display example by @Gnyblast in #646
• rp2xxx: Use deadline for UART by @Grazfather in #731
• Add more verbose panic handler for Debug builds by @Grazfather in #733
• Add better fault handling for ARM targets by @ikskuh in #633
• rp2xxx: Update readme to describe boot process and flashless targets by @Grazfather in #734
• rp2xxx: Cleanup linker scripts by @tact1m4n3 in #735
• rp2xxx: PIO: Fix sideset having no way to account for optional bit by @Grazfather in #736
• refactor "generate_vector_table" and update affected examples by @RecursiveError in #738
• ch32v: Add time keeping via systick by @Grazfather in #742
• Better HAL for STM32F303 by @mathk in #729
• Improve I2C device compatibility for STM32F303 by @mathk in #745
• Add HTS221 sensor driver (temperature only) by @mathk in #746
• STDM32F303: I2C: Fix typos and use names more similar to rp2xxx HAL by @Grazfather in #748
• stm32f303: examples: hts221: Fix by @Grazfather in #751
• ch32v: Improve timekeeping by @Grazfather in #752
• ch32v: Define structs for CSRs by @Grazfather in #753
• Add HAL for the STM32L47X and move peripherals to common folder by @mathk in #747
• cortex_m: Enable fpu on startup by @tact1m4n3 in #749
• Adding humidity retrival for the HTS221 sensor by @mathk in #756
• rtt: Export RttControlBlock by @tact1m4n3 in #758
• regz: Standard format for chip properties by @tact1m4n3 in #757
• esp: fix I2C writes by @andreacoradi in #750
• esp32c3: Fix alignment of ram text by @Grazfather in #759
• ch32v: Improve timekeeping by @Grazfather in #761
• Fix STM32 example compilation issue by @mathk in #763
• ch32v: Add get_freqs, USART hal by @Grazfather in #762
• Add support for the STM32L476G discovery board and basic LCD support by @mathk in #755
• ch32v: Improve clock configuration by @Grazfather in #767
• esp32c3: correctly use END or STOP for I2C reads and writes by @andreacoradi in #764
• Add dsp extension to rp2350 (arm) by @piotrfila in #769
• Rework USB driver by @piotrfila in #760
• Flash driver interface by @Copper280z in #589
• feat: add ds18b20 driver by @kaans in #754
• Add systick low level abstraction and add clock device for stm32 by @mathk in #768
• Added a few helper APIs for the RP2040 pwm by @Kytezign in #771
• Make dump args a path to allow generating file at the same time by @mathk in #772
• Don't distinguish between Regz generated code for "standalone" by @mattnite in #773
• Make STM32 HAL and board more align and push more peripheral to common by @mathk in #770
• Set register and bitfield defaults to reset values by @mattnite in #774
• Make public app declarations available from root by @mattnite in #775
• Flush the linter by @mattnite in https://github.com/ZigEmbeddedGroup/microzi...

0.14.4

Full Changelog: 0.14.3...0.14.4

0.15.0

What's Changed

• Zig 0.15.1 by @mattnite in #651
• svd: Parse access type in case-insensitive manner by @Grazfather in #664
• nrf5x: Use RTC for timekeeping, track overflows for extra bits by @Grazfather in #662
• MicroZig 0.15.0 by @mattnite in #667
• build_system: Increase eval quota to avoid compile error by @tact1m4n3 in #665
• printer: Refactor annotation api and testing by @tact1m4n3 in #668
• Fix website publishing CI pipeline by @mattnite in #669
• Try fixing publication again by @mattnite in #670

Full Changelog: 0.14.3...0.15.0

0.14.3

What's Changed

• nrf52: Implement writev_blocking for i2cdma by @Grazfather in #636
• build_system: stack option in Target by @tact1m4n3 in #640
• rp2xxx: Remove SchmittTrigger, use Enabled by @Gnyblast in #635
• rp2xxx: Fix pins.zig and examples by @tact1m4n3 in #643
• I2c interface by @Grazfather in #642
• cortex_m+hazard3+rp2xxx: Ram vector table refactor by @tact1m4n3 in #641
• drivers: sensors: Add TLV493D sensor driver by @Grazfather in #638
• rp2xxx: rom refactoring and support for rp2350 by @tact1m4n3 in #647
• I2C_Device: Make is_reserved return an AddressError by @Grazfather in #648
• rp2xxx: Add set_interrupts_enabled and non blocking read to uart hal by @tact1m4n3 in #644
• ATDF nested register groups by @mattnite in #650
• General bug fixing by @tact1m4n3 in #652
• drivers: Add MPU-6050 driver by @tact1m4n3 in #654
• Clock device refactor by @tact1m4n3 in #655
• rp2xxx: add fpu and dcp support by @tact1m4n3 in #653
• STM32F103 Small APIS and changes by @RecursiveError in #639
• feat: add nxp mcx port by @rmrt1n in #649
• Overhaul i2c_device interfaces, implement, update some drivers by @Grazfather in #645
• rp2xxx: Set entry point symbol for flashless targets by @Grazfather in #659
• Miscellaneous cleanup by @Grazfather in #656
• drivers: TLV493d: Fixup a bit, disable frame checking and reset by @Grazfather in #660
• Set and use default baud rate for UART by @Grazfather in #661
• 0.14.3 Release by @mattnite in #663

New Contributors

• @Gnyblast made their first contribution in #635
• @rmrt1n made their first contribution in #649

Full Changelog: 0.14.2...0.14.3

0.14.2

What's Changed

• Support timeouts in i2c datagram devices by @Grazfather in #566
• esp32 Trap Dispatch Improvement by @Uthedris in #570
• cleanup redundant returns by @Grazfather in #573
• Add write_then_read to Datagram_Device by @cswank in #574
• Add writev_then_readv to the test Datagram_Device by @Grazfather in #575
• Clock_Device: Allow providing sleep function to avoid polling by @Grazfather in #576
• drivers: Add ICM-20948 9dof sensor driver by @Grazfather in #572
• rp2xxx: pio: Fix some exported types by @Grazfather in #577
• Linter for MicroZig by @mattnite in #579
• Improve code style consistency by @mattnite in #580
• ESP32-C3 spi and WS2812 driver by @tact1m4n3 in #581
• Driver for the mlx90640 thermal imaging camera by @cswank in #578
• nRF52x: HAL: Add SPIM by @Grazfather in #584
• esp: fix spi driver connect and disconnect methods for dynamic dispatch by @tact1m4n3 in #586
• Cortex m priority fixes. by @Uthedris in #587
• linter: Skip deleted files by @tact1m4n3 in #590
• drivers: Add support for magnetometer in ICM-20948 driver by @Grazfather in #591
• Stm32f1 adc by @RecursiveError in #582
• drivers: Cleanup ICM-20948 driver by @Grazfather in #592
• allow for PRs from forks to run linting checks by @mattnite in #594
• RP2xxx: Fix overflow when PIO programs contain 32 instructions by @piotrfila in #599
• Fix deprecated tokenize->tokenizeAny in PIO assembler by @cortex in #598
• Linker script generation update by @tact1m4n3 in #588
• nrf5x: micro:bit support by @tact1m4n3 in #600
• Regz Wizard: UI to explore generated code by @mattnite in #596
• image -> img by @mattnite in #603
• Fix devlog section links by @mattnite in #605
• Deduplicate linter comments by @mattnite in #606
• Remove linter test funcs by @mattnite in #607
• Add pico2 arm flashless target board by @Grazfather in #604
• Avoid windows builds of regz wizard for now by @mattnite in #610
• add legend for monorepo by @mattnite in #608
• Remove docs/, move relevant documentation to website by @mattnite in #611
• Add clock management and configuration for STM32F103 by @RecursiveError in #609
• fix stm32f103 i2c driver by @RecursiveError in #613
• Added RTT by @haydenridd in #612
• RP2xxx: Add try_lock to spinlocks. by @piotrfila in #614
• RP2xxx: Add missing rom functions by @piotrfila in #615
• CH32F003 - Flash to start 0x0 by @burgrp in #618
• Refactor GPtimer API and add Counter and PWM for STM32F1xx by @RecursiveError in #619
• core: Update panic handler and main() error handling by @tact1m4n3 in #621
• regz: optional enum in set_enum_type patch by @tact1m4n3 in #624
• esp: ESP32-C3 flashless target by @tact1m4n3 in #627
• STM32F1xxx Low-level timer APIs by @RecursiveError in #625
• tools: Add printer tool by @tact1m4n3 in #622
• Housekeeping by @tact1m4n3 in #626
• STM32: Apply RCC to all examples by @RecursiveError in #628
• Several fixes and cleanups for RP2xxx by @ikskuh in #630
• Fix a bunch of typos on stm32 hal/examples by @Grazfather in #629
• bump to 0.14.2 by @mattnite in #631

New Contributors

• @cswank made their first contribution in #574
• @cortex made their first contribution in #598

Full Changelog: 0.14.1...0.14.2

0.14.1

What's Changed

• update to 0.14.0 by @mattnite in #518
• esp: hal: i2c (part 2) by @Grazfather in #513
• WCH CH32V: add system clock init by @ghostiam in #520
• WCH CH32V: add chip ch32v305xb and fix 307xc by @ghostiam in #521
• WCH CH32V: examples: replace busyloop with busy_delay by @ghostiam in #519
• WCH CH32V: fix cpu startup by @ghostiam in #522
• basic f1 HAL by @RecursiveError in #431
• WCH CH32: add support for all CH32V series and refactor MCU definitions. by @ghostiam in #523
• Add support for SVD dimIndex parsing by @zovko in #508
• WCH CH32V: build: add linker script generator that places .srodata and .rodata in FLASH. by @ghostiam in #526
• Aviron: Fix ELF loading by @Grazfather in #525
• [rp2xxx] Better dma interface by @vesim987 in #517
• Read vector from mtvec not vtor when starting core 1 on riscv core. by @Uthedris in #529
• WCH CH32V: cpus: refactoring by @ghostiam in #528
• WCH CH32V: fix build 🤯 by @ghostiam in #532
• Regz svd cluster by @mattnite in #530
• build regz in release-safe by @mattnite in #537
• Rename CPUOptions to CPU_Options by @tact1m4n3 in #538
• Use atpack directly for atsamd register schema by @mattnite in #539
• get raspberry pi pico SVDs from pico-sdk by @mattnite in #541
• Rp2350 support improvement by @Uthedris in #540
• Fixes to rp2xxx HAL pwm.zig by @Uthedris in #542
• Add rp2040 ram image (flashless) target board by @Grazfather in #535
• Rp2040 atomics by @Uthedris in #545
• Add ram_image boolean to mz.Target and expose via microzig.config by @Grazfather in #544
• first fragments of STM32F1 USB-FS HAL by @RecursiveError in #543
• Restore the microzig_flash_start section for ARM by @Grazfather in #551
• esp: Add atomic intrinsics by @tact1m4n3 in #548
• Introduce HAL_Options by @tact1m4n3 in #549
• Fix cpu.interrupt.is_enabled for Cortex M by @Corendos in #550
• esp: join cpu and add rom functions by @tact1m4n3 in #552
• Rp2350 hal additions by @Uthedris in #546
• esp: enable cache by @tact1m4n3 in #553
• rp2xxx: Cleanup gpio hal by @Grazfather in #556
• nrf5x: Add working blinky example by @Grazfather in #554
• update USB + LL CDC example by @RecursiveError in #555
• nrf52xx: Basic GPIO hal by @Grazfather in #557
• nRF52xxx: Add UART hal + examples by @mattnite in #558
• Fix bug in rp2350 hazard3's set_handler by @Uthedris in #559
• nRF5x: Add basic timer support by @Grazfather in #560
• 0.14.1 by @mattnite in #563
• nRF5x: Add i2c hal + datagram device by @Grazfather in #561
• Fixes to interrupt handling by @Uthedris in #562
• nRF52: Add clock device by @Grazfather in #564
• improve STM32 usb by @RecursiveError in #568
• Actually releasing 0.14.1 by @mattnite in #569

New Contributors

• @ghostiam made their first contribution in #520
• @zovko made their first contribution in #508
• @Corendos made their first contribution in #550

Full Changelog: 0.14.0...0.14.1

0.14.0

What's Changed

• Supporting non-contiguous registers by @taylorh140 in #357
• rp2xxx: enable all riscv features by @tact1m4n3 in #358
• Foundation libc by @mattnite in #362
• Move time types (Absolute, Duration, Deadline) from rp2xxx HAL into mdf by @Grazfather in #360
• rp2xxx: hal: gpio: Fix rp2350 GPIO reg access by @Grazfather in #364
• Add microzig_flash_end to linker script by @arkadiuszwojcik in #363
• Add Stepper motor driver by @Grazfather in #359
• Fix usb_cdc on rp2350 by @patryk4815 in #367
• Mmio: toggle() now supports enum type fields; add ..._one() variants by @marnix in #371
• Add microzig.config.board_name by @marnix in #372
• Enable 'unwind_tables' for all platforms (for #370) by @marnix in #373
• Rewrite STM32 blinky to easily add other boards/chips. by @marnix in #374
• STM32F303: First HAL fragments (depends on #371) by @marnix in #375
• regz+rp2xxx: add_interrupt patch by @tact1m4n3 in #378
• Add Support for non-constant stride field arrays. (STM32) by @taylorh140 in #377
• STM32F3DISCOVERY: Working blinky by @marnix in #379
• WCH: Add support for CH32V307 chip and CH32V307V-R1-1v0 board by @pigmoral in #383
• rp2xxx: hal: spi: Inline & pub-ify get_regs by @Grazfather in #385
• rp2xxx: examples: Fix name of 'generic' examples by @Grazfather in #386
• Fix rp2xxx UART0_TX available pins by @piotrfila in #380
• rp2040: Add spi slave example by @Grazfather in #391
• drivers: stepper: Implement start_brake, stop, & expose motor_steps by @Grazfather in #393
• Add basic support to semihosting by @RecursiveError in #384
• rp2040: Fix extab section getting put before .text by @Grazfather in #394
• doc: add link to SYCL Badge by @coolaj86 in #397
• Interrupt refactor by @tact1m4n3 in #369
• avr: update example to use core.experimental by @oliverpool in #401
• regz: generate enums attached to parent by @oliverpool in #404
• rp2350: Fix GlobalConfig for uart, rename func to match rp2040 by @Grazfather in #403
• Update to 0.14.0 by @ikskuh in #399
• Minor bugfix in i2c driver for rp2xxx by @haydenridd in #409
• Use .ptr for interfaces to match zig idiom by @Grazfather in #410
• rp2xxx: pio: Check for sideset/delay collisions by @Grazfather in #411
• Regz Binary Value Bugfix by @haydenridd in #412
• examples: rp2xxx: interrupts: Cleanup and clarify cleaning behaviour by @Grazfather in #414
• import microzig as microzig by @Grazfather in #413
• (Re)Add support for multiple interrupt calling conventions by @tact1m4n3 in #417
• Fix hazard3 CSR bug and compile errors by @tact1m4n3 in #418
• ESP32-C3 better support by @tact1m4n3 in #415
• add build date to website by @mattnite in #421
• examples: Add 'example' option to only build matches by @Grazfather in #422
• RP2xxx I2c slave by @Uthedris in #419
• Fix typo in utf8ToUtf16Le alias by @hryx in #425
• Spin lock management by @Uthedris in #424
• HID: report descriptor for boot keyboard by @hryx in #426
• Drivers: Add TMP117 temperature driver by @Grazfather in #423
• Need more branch quota in Mmio by @Uthedris in #430
• Fixed race condition in RP2xxx i2c_slave by @Uthedris in #428
• Fix ADC FIFO control and status register name typo by @eboskma in #434
• esp32-c3: interrupts and clock configuration by @tact1m4n3 in #435
• usb: zig fmt by @hryx in #437
• esp32c3: Add usb serial jtag logger by @tact1m4n3 in #436
• Fix RP2xxx get_cpu_id call by @Uthedris in #443
• Set more build.zig.zon fingerprints and re-enable wch examples by @Grazfather in #438
• RP2XXX add GPIO set drive strength by @arkadiuszwojcik in #440
• regz: Give default values to padding and reserved bits fields by @Uthedris in #429
• RP2XXX DMA code refactor by @arkadiuszwojcik in #442
• Fix PR website building gh action by @Grazfather in #448
• examples: rp2xxx: Make examples more consistent by @Grazfather in #447
• RP2XXX USB - replace rom.memcpy with @memcpy by @arkadiuszwojcik in #432
• Add cpu and zig_target options directly to a microzig.Target by @tact1m4n3 in #450
• HID: basic keyboard support by @hryx in #449
• Fix licenses by @Grazfather in #456
• Release 0.14.0 by @Grazfather in #451
• Fixup stepper by @Grazfather in #459
• build system: implement get_emitted_docs() for Firmware by @tact1m4n3 in #461
• Update boxzer to use new hashing format by @mattnite in #463
• Migrate aviron by @mattnite in #464
• drivers: Add 28byj/uln2003 stepper motor driver by @Grazfather in #457
• Multicore aware mutex for rp2xxx by @Uthedris in #444
• rename aviron package to simulators_aviron by @mattnite in #466
• Make github action for running driver unit tests by @mattnite in #467
• Remove unmaintained clutter (Nix stuff) by @mattnite in #468
• update package naming scheme by @mattnite in #482
• Add time hal for esp32c3 by @Grazfather in #439
• Further cleanup by @mattnite in #484
• esp: Add GPIO device to hal by @Grazfather in #483
• esp: gpio: Convert pin to enum by @Grazfather in #487
• RP2xxx RAM based vector table by @Uthedris in #427
• esp: Add dumb stepper motor example by @Grazfather in #488
• esp: systimer and system hal by @tact1m4n3 in #485
• Atomics support for RP2040 by @arkadiuszwojcik in #495
• esp: Improve GPIO hal by @Grazfather in #490
• add @aligncast PCF8574 driver by @RecursiveError in #492
• Make sure ram_vectors are properly aligned. by @Uthedris in #493
• zig fmt everything/test in ci by @Grazfather in #494
• Spinlocks code refactor - IRQ disable version by @arkadiuszwojcik in #496
• CYW43xx driver - part 1 by @arkadiuszwojcik in #489
• esp: Fix some gpio enum tag names by @tact1m4n3 in #497
• Add SH110...

0.13.2

What's Changed

• Add regz/uf2 release build option by @EliSauder in #335
• Allow direct usage of microzig by @mattnite in #337
• Cleanup Old/Extra Files by @EliSauder in #333
• Removed Extracted for-extraction folder by @EliSauder in #342
• regz and stm32: Support array fields in registers by @marnix in #343
• Added watchdog timer API for both RP2040 and RP2350 by @haydenridd in #338
• Fix USB CDC stability issue when sending data by @arkadiuszwojcik in #345
• pio: Assembler: fix issue in diag when tokenizer has index on newline by @Grazfather in #347
• Fix error handling in rp2xxx pio assembler by @Grazfather in #346
• [rp2xxx] Add initial riscv support for the rp2350 chip by @tact1m4n3 in #348
• add an example of how to use MicroZig without HAL by @lcp5y3 in #344
• Update CI workflow with job dependencies by @EliSauder in #340
• Add regz and uf2 releases to the github deploy action by @EliSauder in #339
• fixing register so there is 32 bits by @freiguy1 in #349
• explicitly disable build-id for rp2xxx bootrom by @Jan200101 in #350
• rp2xxx: Add support for assembling RP2350-specific PIO by @Grazfather in #320
• support "extends" from embassy data. by @taylorh140 in #351
• Generate standalone files for Regz by default by @mattnite in #353
• Update version and webpage to reference 0.13.2 by @mattnite in #354

New Contributors

• @EliSauder made their first contribution in #335
• @lcp5y3 made their first contribution in #344
• @Jan200101 made their first contribution in #350

Full Changelog: 0.13.1...0.13.2

0.13.1

What's Changed

• Fix github page pathing and list site contents by @mattnite in #280
• adding NVIC registers for cortex m0+, fixing little bug with stringToEnum by @freiguy1 in #281
• Integrates driver framework by @ikskuh in #246
• Use program origin when computing label addresses by @tomasz-lisowski in #287
• Combine .sbss section with .bss. by @nosuz in #288
• Build system rewrite by @tact1m4n3 in #259
• Port for WCH CH32V series (CH32V003, CH32V103, and CH32V203) by @nosuz in #286
• stm32: Merge chip flash memory bank regions by @tact1m4n3 in #282
• Comptime USB endpoints number by @arkadiuszwojcik in #284
• Add helpers for reading from PIO RX FIFO and for PIO SM pin configuration by @tomasz-lisowski in #289
• Regz patching by @mattnite in #290
• Update packaging to include root package by @mattnite in #291
• Build system bug fix by @tact1m4n3 in #292
• USB CDC - improve writing and implement reading (almost) by @arkadiuszwojcik in #293
• cortex_m: Add core peripherals by @tact1m4n3 in #295
• Add cortex m7 register definitions by @devBoi76 in #294
• Fix USB CDC receive code by @arkadiuszwojcik in #299
• Fixed building error for WCH CH32V by @nosuz in #298
• rp2xxx: Make pio.Irq.get_irq_regs public by @Grazfather in #300
• Updated PR #223 for current HEAD and extended it for other WCH's CH32V series. by @nosuz in #302
• Fix depend_on_microzig option in add_app_import by @MatthiasPortzel in #305
• rp2xxx: improve RP2350 port by @vesim987 in #264
• Add PIO support to rp2350 by @Grazfather in #306
• core: Fix wrong cpu name for cortex m0 plus by @tact1m4n3 in #308
• add hd44780 driver + rppico example by @RecursiveError in #301
• build-system: Fix bug in add_firmware by @tact1m4n3 in #309
• Fix NVIC level IRQ control for RP2040 by @haydenridd in #310
• [RP2xxx] USB driver refactory work by @arkadiuszwojcik in #312
• RTC Support for RP2040 by @haydenridd in #317
• [RP2xxx] Update pins helper to create pins as comptime-available data instead of zero-sized-types by @MatthiasPortzel in #303
• Update rtc example with pin config refactor by @mattnite in #319
• Switch out Regz datastructures for SQLite by @mattnite in #316
• Get website ready for 0.13.1 release by @mattnite in #321
• revert deletion of url prefix by @mattnite in #322
• build website after collecting download contents by @mattnite in #323
• list contents of website before publishing by @mattnite in #324
• build website as part of metadata script by @mattnite in #325
• Fix website publishing by @mattnite in #326
• Minor fixes to IRQ + example to utilize microzig.cpu interface by @haydenridd in #327
• workflows: Run unit tests on more ports by @Grazfather in #318
• Get esp32 examples building again by @Grazfather in #307
• Directly generate enums by @mattnite in #328
• Refactor Actions by @mattnite in #329
• Check that stm32 code is up to date by @mattnite in #330
• Update stm32 generated code and properly set up data dependency as lazy by @mattnite in #331
• bump version by @mattnite in #332

New Contributors

• @tact1m4n3 made their first contribution in #259
• @devBoi76 made their first contribution in #294

Full Changelog: 0.13.0...0.13.1

0.13.0

What's Changed

• support bundling only specific boards by @tobiaskohlbau in #166
• fix documentation for patch tool by @tobiaskohlbau in #165
• Fixes CI Badge in README.md by @ikskuh in #164
• hal: dma: Cast channel index in claim_unused_channel by @Grazfather in #170
• Fix requirements.txt and update README by @Grazfather in #172
• Better readme by @ikskuh in #173
• rp2040: Fix DMA not respecting transfer_size_bytes by @Grazfather in #176
• rp2040: Add support for PIO's jmp_pin by @Grazfather in #174
• usb: unify handling of length parameters by @tobiaskohlbau in #177
• Update to zig master, move uf2 and regz to monorepo by @mattnite in #178
• Fix reference to design document in README by @tomasz-lisowski in #184
• Fix setting pull direction in pinConfig by @MatthiasPortzel in #189
• Some predefined registers for Cortex M by @mattnite in #190
• bump versions by @mattnite in #192
• fix regz output for sycl-badge by @jacobly0 in #193
• Properly export startup logic for espressif-riscv by @DNedic in #199
• Linking and linker relaxation fixes by @DNedic in #200
• USB driver: support chunked data by @arkadiuszwojcik in #201
• Complete Gd32f103 Support by @asterix24 in #203
• Fix RP2040 multicore HAL and re-enable example by @MatthiasPortzel in #207
• Use app provided panic handler if it exists by @MatthiasPortzel in #209
• Updated to zig 0.13.0 by @biom4st3r in #198
• Enable atsamd51j19 fpu by @jacobly0 in #196
• rp2040: remove redendant code in I2C.apply() by @hryx in #212
• Basic support for ATmega32u4 by @biom4st3r in #195
• fixup! enable atsamd51j19 fpu (#196) by @vesim987 in #218
• fix(rp2040) apply broken codegen workaround to both busy loop by @vesim987 in #219
• USB CDC ACM support + code refactor by @arkadiuszwojcik in #211
• Fix mmio toggle by @akiroz in #157
• Strip Unused Symbols at Link Time by @haydenridd in #225
• feat(regz) Improve schema detection and make it easier to use as library by @vesim987 in #217
• fix(avr5): fix building blinking examples by @vesim987 in #226
• feat(build): Enable working examples for stm32 and gd32 by @vesim987 in #227
• RP2040 SPI HAL Improvements by @haydenridd in #222
• RP2040 I2C Refactor by @haydenridd in #213
• Initial ESP32-C3 GPIO HAL driver by @DNedic in #216
• RP2040 Uart Refactor by @haydenridd in #228
• Add GPIO Config to SPI Example by @haydenridd in #233
• Code generator for stm32 based on embassy-rs/stm32-data by @mattnite in #235
• Update some of the getting started details. by @taylorh140 in #238
• Fix rp2040 gpio_clock example. by @eugenepentland in #237
• Update website and zine (Zig 0.13) and fix broken links by @MatthiasPortzel in #229
• RP2040 Clock Control Refactor by @haydenridd in #239
• Generate enums for stm32 by @mattnite in #240
• bsp => port by @mattnite in #241
• ESP 32 blinky example - typo fix by @RokKos in #243
• RP2350 Initial Support by @haydenridd in #244
• RP2 writev/readv implementation by @ikskuh in #254
• Support I2C and SPI functions in the pins abstraction by @MatthiasPortzel in #262
• add UART Control Flow to rppico by @RecursiveError in #260
• Generated STM32 targets with FPU by @Copper280z in #255
• Fixed RP2xxx usb reset register masks by @eugenepentland in #265
• Register Map Implementation for Cortex M33 by @Dolphindalt in #257
• add uart example by @RecursiveError in #266
• Deploy website to github pages by @mattnite in #268
• Fix working directory in publish action by @mattnite in #269
• Fix github action version by @mattnite in #270
• Clean out website for redesign by @mattnite in #271
• Minor fix build.zig for GD32 examples to make correct binary format files. by @nosuz in #273
• Improve packaging and website publication by @mattnite in #275
• Ignore error if release doesn't have artifact by @mattnite in #276
• Fix page deploy again by @mattnite in #277
• Change release tag pattern by @mattnite in #278
• Update boxzer and fix metadata location by @mattnite in #279

New Contributors

• @tobiaskohlbau made their first contribution in #166
• @Grazfather made their first contribution in #170
• @tomasz-lisowski made their first contribution in #184
• @MatthiasPortzel made their first contribution in #189
• @DNedic made their first contribution in #199
• @arkadiuszwojcik made their first contribution in #201
• @asterix24 made their first contribution in #203
• @biom4st3r made their first contribution in #198
• @hryx made their first contribution in #212
• @akiroz made their first contribution in #157
• @haydenridd made their first contribution in #225
• @taylorh140 made their first contribution in #238
• @eugenepentland made their first contribution in #237
• @RokKos made their first contribution in #243
• @RecursiveError made their first contribution in #260
• @Copper280z made their first contribution in #255
• @Dolphindalt made their first contribution in #257
• @nosuz made their first contribution in #273

Full Changelog: 0.11.0...0.13.0