Repository navigation
MacOS Liquid Detection #1449
|
I have a MacBook Pro M5 with macOS Tahoe, and it's displaying a liquid detection warning on the USB port, but I don't have any USB devices connected to the computer. I ran a diagnostic script, and apparently it detects liquid and then detects that it's dry. Because of this, the liquid warning keeps appearing and flashing on the screen repeatedly, which is bothering me. Does anyone know what to do? |
Replies: 1 comment
|
@AntEcologist This is not something Mole can help with, and I would rather say that plainly than have you spend time on it. The liquid detection warning comes from a hardware sensor in the port and is reported by the system itself. No cleanup tool can change what that sensor reads, and Mole never touches that layer. A warning that appears, clears and reappears usually means the sensor is reading marginal, which is more often residue or corrosion in the port than actual standing liquid. What tends to help in practice: power the machine off, leave it port-down at room temperature for several hours, and do not use compressed air or put anything into the port. If it keeps cycling after that, book an Apple Support appointment while the machine is still new. A port-level sensor fault is a warranty repair, not something worth working around. |
@AntEcologist This is not something Mole can help with, and I would rather say that plainly than have you spend time on it.
The liquid detection warning comes from a hardware sensor in the port and is reported by the system itself. No cleanup tool can change what that sensor reads, and Mole never touches that layer. A warning that appears, clears and reappears usually means the sensor is reading marginal, which is more often residue or corrosion in the port than actual standing liquid.
What tends to help in practice: power the machine off, leave it port-down at room temperature for several hours, and do not use compressed air or put anything into the port. If it keeps cycling after that, …