lcdcode.txt

#include <stdlib.h>
#include <avr/io.h>
#include <avr/pgmspace.h>
#include <compat/deprecated.h>		//HEADER FILE FOR FUNCTIONS LIKE SBI AND CBI
#include<util/delay.h>				//HEADER FILE FOR DELAY

#include "lcd.h"




int main(void)
{
   // char buffer[7];
    //int  num=134;
   // unsigned char i;
	
	//DDRA=0xF0;						//SET DATA DIRECTION REGISTER
									//SET 1 for OUTPUT PORT
									//SET 0 FOR INPUT PORT
									//PA.4, PA.5, PA.6 AND PA.7 ARE OUTPUT
									//ALL OTHERS ARE INPUT
									
	DDRB=0XFF;						//SET DATA DIRECTION REGISTER
									//SET 1 for OUTPUT PORT
									//SET 0 FOR INPUT PORT
									//PB.2 IS  INPUT
									//ALL OTHERS ARE OUTPUT
	
//	DDRD=0XF1;						//SET DATA DIRECTION REGISTER
									//SET 1 for OUTPUT PORT
									//SET 0 FOR INPUT PORT
									//PD.1, PD.2 AND PD.3 ARE INPUT
									//ALL OTHERS ARE OUTPUT
	
	DDRC=0xFF;
		
	//sbi(PORTB,2);					//ENABLE PULL UP FOR SWITCH INT2
	//sbi(PORTD,1);					//ENABLE PULL UP FOR SW1
	//sbi(PORTD,2);					//ENABLE PULL UP FOR SWITCH INT0
	//sbi(PORTD,3);					//ENABLE PULL UP FOR SWITCH INT1
    
    lcd_init(LCD_DISP_ON);					/* initialize display, cursor off */

    for (;;)								/* loop forever */ 
	{                           
        lcd_clrscr();						/* clear display and home cursor */        
        lcd_puts("ROBOKITS INDIA\n");		/* put string to display (line 1) with linefeed */		
        lcd_puts("    ROBOKITS.ORG");		/* cursor is now on second line, write second line */		
		lcd_gotoxy(0,1);  					/* move cursor to position 0 on line 2 */        
        lcd_puts("WWW.");					/* write single char to display */                
      //  wait_until_key_pressed();			/* wait until push button PB2 (INT2) is pressed */
		
		
        lcd_command(LCD_DISP_ON_CURSOR);	/* turn on cursor */
        lcd_clrscr();     					/* clear display home cursor */		
        lcd_puts( "CurOn");
					/* wait until push button PB2 (INT2) is pressed */
        
        
		lcd_clrscr();     					/* clear display home cursor */	
		lcd_puts_P( "Line 1 longer than 14 characters\n" );	/* put string from program memory to display */
        lcd_puts_P( "Shift both line1 and line2 left" );		
						/* wait until push button PB2 (INT2) is pressed */
    }
}