csi.proto

// Code generated by make; DO NOT EDIT.
syntax = "proto3";
package csi.v1;

import "google/protobuf/descriptor.proto";
import "google/protobuf/timestamp.proto";
import "google/protobuf/wrappers.proto";

option go_package = 
  "github.com/container-storage-interface/spec/lib/go/csi";

extend google.protobuf.EnumOptions {
  // Indicates that this enum is OPTIONAL and part of an experimental
  // API that may be deprecated and eventually removed between minor
  // releases.
  bool alpha_enum = 1060;
}
extend google.protobuf.EnumValueOptions {
  // Indicates that this enum value is OPTIONAL and part of an
  // experimental API that may be deprecated and eventually removed
  // between minor releases.
  bool alpha_enum_value = 1060;
}
extend google.protobuf.FieldOptions {
  // Indicates that a field MAY contain information that is sensitive
  // and MUST be treated as such (e.g. not logged).
  bool csi_secret = 1059;

  // Indicates that this field is OPTIONAL and part of an experimental
  // API that may be deprecated and eventually removed between minor
  // releases.
  bool alpha_field = 1060;
}
extend google.protobuf.MessageOptions {
  // Indicates that this message is OPTIONAL and part of an experimental
  // API that may be deprecated and eventually removed between minor
  // releases.
  bool alpha_message = 1060;
}
extend google.protobuf.MethodOptions {
  // Indicates that this method is OPTIONAL and part of an experimental
  // API that may be deprecated and eventually removed between minor
  // releases.
  bool alpha_method = 1060;
}
extend google.protobuf.ServiceOptions {
  // Indicates that this service is OPTIONAL and part of an experimental
  // API that may be deprecated and eventually removed between minor
  // releases.
  bool alpha_service = 1060;
}
service Identity {
  rpc GetPluginInfo(GetPluginInfoRequest)
    returns (GetPluginInfoResponse) {}

  rpc GetPluginCapabilities(GetPluginCapabilitiesRequest)
    returns (GetPluginCapabilitiesResponse) {}

  rpc Probe (ProbeRequest)
    returns (ProbeResponse) {}
}

service Controller {
  rpc CreateVolume (CreateVolumeRequest)
    returns (CreateVolumeResponse) {}

  rpc DeleteVolume (DeleteVolumeRequest)
    returns (DeleteVolumeResponse) {}

  rpc ControllerPublishVolume (ControllerPublishVolumeRequest)
    returns (ControllerPublishVolumeResponse) {}

  rpc ControllerUnpublishVolume (ControllerUnpublishVolumeRequest)
    returns (ControllerUnpublishVolumeResponse) {}

  rpc ValidateVolumeCapabilities (ValidateVolumeCapabilitiesRequest)
    returns (ValidateVolumeCapabilitiesResponse) {}

  rpc ListVolumes (ListVolumesRequest)
    returns (ListVolumesResponse) {}

  rpc GetCapacity (GetCapacityRequest)
    returns (GetCapacityResponse) {}

  rpc ControllerGetCapabilities (ControllerGetCapabilitiesRequest)
    returns (ControllerGetCapabilitiesResponse) {}

  rpc CreateSnapshot (CreateSnapshotRequest)
    returns (CreateSnapshotResponse) {}

  rpc DeleteSnapshot (DeleteSnapshotRequest)
    returns (DeleteSnapshotResponse) {}

  rpc ListSnapshots (ListSnapshotsRequest)
    returns (ListSnapshotsResponse) {}

  rpc GetSnapshot (GetSnapshotRequest)
    returns (GetSnapshotResponse) {
        option (alpha_method) = true;
    }

  rpc ControllerExpandVolume (ControllerExpandVolumeRequest)
    returns (ControllerExpandVolumeResponse) {}

  rpc ControllerGetVolume (ControllerGetVolumeRequest)
    returns (ControllerGetVolumeResponse) {
        option (alpha_method) = true;
    }

  rpc ControllerModifyVolume (ControllerModifyVolumeRequest)
    returns (ControllerModifyVolumeResponse) {
    }
}

service GroupController {
  rpc GroupControllerGetCapabilities (
        GroupControllerGetCapabilitiesRequest)
    returns (GroupControllerGetCapabilitiesResponse) {}

  rpc CreateVolumeGroupSnapshot(CreateVolumeGroupSnapshotRequest)
    returns (CreateVolumeGroupSnapshotResponse) {
    }

  rpc DeleteVolumeGroupSnapshot(DeleteVolumeGroupSnapshotRequest)
    returns (DeleteVolumeGroupSnapshotResponse) {
    }

  rpc GetVolumeGroupSnapshot(
        GetVolumeGroupSnapshotRequest)
    returns (GetVolumeGroupSnapshotResponse) {
    }
}

service SnapshotMetadata {
  option (alpha_service) = true;

  rpc GetMetadataAllocated(GetMetadataAllocatedRequest)
    returns (stream GetMetadataAllocatedResponse) {}

  rpc GetMetadataDelta(GetMetadataDeltaRequest)
    returns (stream GetMetadataDeltaResponse) {}
}

service Node {
  rpc NodeStageVolume (NodeStageVolumeRequest)
    returns (NodeStageVolumeResponse) {}

  rpc NodeUnstageVolume (NodeUnstageVolumeRequest)
    returns (NodeUnstageVolumeResponse) {}

  rpc NodePublishVolume (NodePublishVolumeRequest)
    returns (NodePublishVolumeResponse) {}

  rpc NodeUnpublishVolume (NodeUnpublishVolumeRequest)
    returns (NodeUnpublishVolumeResponse) {}

  rpc NodeGetVolumeStats (NodeGetVolumeStatsRequest)
    returns (NodeGetVolumeStatsResponse) {}


  rpc NodeExpandVolume(NodeExpandVolumeRequest)
    returns (NodeExpandVolumeResponse) {}


  rpc NodeGetCapabilities (NodeGetCapabilitiesRequest)
    returns (NodeGetCapabilitiesResponse) {}

  rpc NodeGetInfo (NodeGetInfoRequest)
    returns (NodeGetInfoResponse) {}
}
message GetPluginInfoRequest {
  // Intentionally empty.
}

message GetPluginInfoResponse {
  // The name MUST follow domain name notation format
  // (https://tools.ietf.org/html/rfc1035#section-2.3.1). It SHOULD
  // include the plugin's host company name and the plugin name,
  // to minimize the possibility of collisions. It MUST be 63
  // characters or less, beginning and ending with an alphanumeric
  // character ([a-z0-9A-Z]) with dashes (-), dots (.), and
  // alphanumerics between. This field is REQUIRED.
  string name = 1;

  // This field is REQUIRED. Value of this field is opaque to the CO.
  string vendor_version = 2;

  // This field is OPTIONAL. Values are opaque to the CO.
  map<string, string> manifest = 3;
}
message GetPluginCapabilitiesRequest {
  // Intentionally empty.
}

message GetPluginCapabilitiesResponse {
  // All the capabilities that the controller service supports. This
  // field is OPTIONAL.
  repeated PluginCapability capabilities = 1;
}

// Specifies a capability of the plugin.
message PluginCapability {
  message Service {
    enum Type {
      UNKNOWN = 0;
      // CONTROLLER_SERVICE indicates that the Plugin provides RPCs for
      // the ControllerService. Plugins SHOULD provide this capability.
      // In rare cases certain plugins MAY wish to omit the
      // ControllerService entirely from their implementation, but such
      // SHOULD NOT be the common case.
      // The presence of this capability determines whether the CO will
      // attempt to invoke the REQUIRED ControllerService RPCs, as well
      // as specific RPCs as indicated by ControllerGetCapabilities.
      CONTROLLER_SERVICE = 1;

      // VOLUME_ACCESSIBILITY_CONSTRAINTS indicates that the volumes for
      // this plugin MAY NOT be equally accessible by all nodes in the
      // cluster. The CO MUST use the topology information returned by
      // CreateVolumeRequest along with the topology information
      // returned by NodeGetInfo to ensure that a given volume is
      // accessible from a given node when scheduling workloads.
      VOLUME_ACCESSIBILITY_CONSTRAINTS = 2;

      // GROUP_CONTROLLER_SERVICE indicates that the Plugin provides
      // RPCs for operating on groups of volumes. Plugins MAY provide
      // this capability.
      // The presence of this capability determines whether the CO will
      // attempt to invoke the REQUIRED GroupController service RPCs, as
      // well as specific RPCs as indicated by
      // GroupControllerGetCapabilities.
      GROUP_CONTROLLER_SERVICE = 3;

      // SNAPSHOT_METADATA_SERVICE indicates that the Plugin provides
      // RPCs to retrieve metadata on the allocated blocks of a single
      // snapshot, or the changed blocks between a pair of snapshots of
      // the same block volume.
      // The presence of this capability determines whether the CO will
      // attempt to invoke the OPTIONAL SnapshotMetadata service RPCs.
      SNAPSHOT_METADATA_SERVICE = 4 [(alpha_enum_value) = true];
    }
    Type type = 1;
  }

  message VolumeExpansion {
    enum Type {
      UNKNOWN = 0;

      // ONLINE indicates that volumes may be expanded when published to
      // a node. When a Plugin implements this capability it MUST
      // implement either the EXPAND_VOLUME controller capability or the
      // EXPAND_VOLUME node capability or both. When a plugin supports
      // ONLINE volume expansion and also has the EXPAND_VOLUME
      // controller capability then the plugin MUST support expansion of
      // volumes currently published and available on a node. When a
      // plugin supports ONLINE volume expansion and also has the
      // EXPAND_VOLUME node capability then the plugin MAY support
      // expansion of node-published volume via NodeExpandVolume.
      //
      // Example 1: Given a shared filesystem volume (e.g. GlusterFs),
      //   the Plugin may set the ONLINE volume expansion capability and
      //   implement ControllerExpandVolume but not NodeExpandVolume.
      //
      // Example 2: Given a block storage volume type (e.g. EBS), the
      //   Plugin may set the ONLINE volume expansion capability and
      //   implement both ControllerExpandVolume and NodeExpandVolume.
      //
      // Example 3: Given a Plugin that supports volume expansion only
      //   upon a node, the Plugin may set the ONLINE volume
      //   expansion capability and implement NodeExpandVolume but not
      //   ControllerExpandVolume.
      ONLINE = 1;

      // OFFLINE indicates that volumes currently published and
      // available on a node SHALL NOT be expanded via
      // ControllerExpandVolume. When a plugin supports OFFLINE volume
      // expansion it MUST implement either the EXPAND_VOLUME controller
      // capability or both the EXPAND_VOLUME controller capability and
      // the EXPAND_VOLUME node capability.
      //
      // Example 1: Given a block storage volume type (e.g. Azure Disk)
      //   that does not support expansion of "node-attached" (i.e.
      //   controller-published) volumes, the Plugin may indicate
      //   OFFLINE volume expansion support and implement both
      //   ControllerExpandVolume and NodeExpandVolume.
      OFFLINE = 2;
    }
    Type type = 1;
  }

  oneof type {
    // Service that the plugin supports.
    Service service = 1;
    VolumeExpansion volume_expansion = 2;
  }
}
message ProbeRequest {
  // Intentionally empty.
}

message ProbeResponse {
  // Readiness allows a plugin to report its initialization status back
  // to the CO. Initialization for some plugins MAY be time consuming
  // and it is important for a CO to distinguish between the following
  // cases:
  //
  // 1) The plugin is in an unhealthy state and MAY need restarting. In
  //    this case a gRPC error code SHALL be returned.
  // 2) The plugin is still initializing, but is otherwise perfectly
  //    healthy. In this case a successful response SHALL be returned
  //    with a readiness value of `false`. Calls to the plugin's
  //    Controller and/or Node services MAY fail due to an incomplete
  //    initialization state.
  // 3) The plugin has finished initializing and is ready to service
  //    calls to its Controller and/or Node services. A successful
  //    response is returned with a readiness value of `true`.
  //
  // This field is OPTIONAL. If not present, the caller SHALL assume
  // that the plugin is in a ready state and is accepting calls to its
  // Controller and/or Node services (according to the plugin's reported
  // capabilities).
  .google.protobuf.BoolValue ready = 1;
}
message CreateVolumeRequest {
  // The suggested name for the storage space. This field is REQUIRED.
  // It serves two purposes:
  // 1) Idempotency - This name is generated by the CO to achieve
  //    idempotency.  The Plugin SHOULD ensure that multiple
  //    `CreateVolume` calls for the same name do not result in more
  //    than one piece of storage provisioned corresponding to that
  //    name. If a Plugin is unable to enforce idempotency, the CO's
  //    error recovery logic could result in multiple (unused) volumes
  //    being provisioned.
  //    In the case of error, the CO MUST handle the gRPC error codes
  //    per the recovery behavior defined in the "CreateVolume Errors"
  //    section below.
  //    The CO is responsible for cleaning up volumes it provisioned
  //    that it no longer needs. If the CO is uncertain whether a volume
  //    was provisioned or not when a `CreateVolume` call fails, the CO
  //    MAY call `CreateVolume` again, with the same name, to ensure the
  //    volume exists and to retrieve the volume's `volume_id` (unless
  //    otherwise prohibited by "CreateVolume Errors").
  // 2) Suggested name - Some storage systems allow callers to specify
  //    an identifier by which to refer to the newly provisioned
  //    storage. If a storage system supports this, it can optionally
  //    use this name as the identifier for the new volume.
  // Any Unicode string that conforms to the length limit is allowed
  // except those containing the following banned characters:
  // U+0000-U+0008, U+000B, U+000C, U+000E-U+001F, U+007F-U+009F.
  // (These are control characters other than commonly used whitespace.)
  string name = 1;

  // This field is OPTIONAL. This allows the CO to specify the capacity
  // requirement of the volume to be provisioned. If not specified, the
  // Plugin MAY choose an implementation-defined capacity range. If
  // specified it MUST always be honored, even when creating volumes
  // from a source; which MAY force some backends to internally extend
  // the volume after creating it.
  CapacityRange capacity_range = 2;

  // The capabilities that the provisioned volume MUST have. SP MUST
  // provision a volume that will satisfy ALL of the capabilities
  // specified in this list. Otherwise SP MUST return the appropriate
  // gRPC error code.
  // The Plugin MUST assume that the CO MAY use the provisioned volume
  // with ANY of the capabilities specified in this list.
  // For example, a CO MAY specify two volume capabilities: one with
  // access mode SINGLE_NODE_WRITER and another with access mode
  // MULTI_NODE_READER_ONLY. In this case, the SP MUST verify that the
  // provisioned volume can be used in either mode.
  // This also enables the CO to do early validation: If ANY of the
  // specified volume capabilities are not supported by the SP, the call
  // MUST return the appropriate gRPC error code.
  // This field is REQUIRED.
  repeated VolumeCapability volume_capabilities = 3;

  // Plugin specific creation-time parameters passed in as opaque 
  // key-value pairs. This field is OPTIONAL. The Plugin is responsible 
  // for parsing and validating these parameters. COs will treat 
  // these as opaque.
  map<string, string> parameters = 4;

  // Secrets required by plugin to complete volume creation request.
  // This field is OPTIONAL. Refer to the `Secrets Requirements`
  // section on how to use this field.
  map<string, string> secrets = 5 [(csi_secret) = true];

  // If specified, the new volume will be pre-populated with data from
  // this source. This field is OPTIONAL.
  VolumeContentSource volume_content_source = 6;

  // Specifies where (regions, zones, racks, etc.) the provisioned
  // volume MUST be accessible from.
  // An SP SHALL advertise the requirements for topological
  // accessibility information in documentation. COs SHALL only specify
  // topological accessibility information supported by the SP.
  // This field is OPTIONAL.
  // This field SHALL NOT be specified unless the SP has the
  // VOLUME_ACCESSIBILITY_CONSTRAINTS plugin capability.
  // If this field is not specified and the SP has the
  // VOLUME_ACCESSIBILITY_CONSTRAINTS plugin capability, the SP MAY
  // choose where the provisioned volume is accessible from.
  TopologyRequirement accessibility_requirements = 7;

  // Plugin specific creation-time parameters passed in as opaque 
  // key-value pairs. These mutable_parameteres MAY also be
  // changed during the lifetime of the volume via a subsequent
  // `ControllerModifyVolume` RPC. This field is OPTIONAL.
  // The Plugin is responsible for parsing and validating these
  // parameters. COs will treat these as opaque.
  
  // Plugins MUST treat these 
  // as if they take precedence over the parameters field.
  // This field SHALL NOT be specified unless the SP has the
  // MODIFY_VOLUME plugin capability.
  map<string, string> mutable_parameters = 8;
}

// Specifies what source the volume will be created from. One of the
// type fields MUST be specified.
message VolumeContentSource {
  message SnapshotSource {
    // Contains identity information for the existing source snapshot.
    // This field is REQUIRED. Plugin is REQUIRED to support creating
    // volume from snapshot if it supports the capability
    // CREATE_DELETE_SNAPSHOT.
    string snapshot_id = 1;
  }

  message VolumeSource {
    // Contains identity information for the existing source volume.
    // This field is REQUIRED. Plugins reporting CLONE_VOLUME
    // capability MUST support creating a volume from another volume.
    string volume_id = 1;
  }

  oneof type {
    SnapshotSource snapshot = 1;
    VolumeSource volume = 2;
  }
}

message CreateVolumeResponse {
  // Contains all attributes of the newly created volume that are
  // relevant to the CO along with information required by the Plugin
  // to uniquely identify the volume. This field is REQUIRED.
  Volume volume = 1;
}

// Specify a capability of a volume.
message VolumeCapability {
  // Indicate that the volume will be accessed via the block device API.
  message BlockVolume {
    // Intentionally empty, for now.
  }

  // Indicate that the volume will be accessed via the filesystem API.
  message MountVolume {
    // The filesystem type. This field is OPTIONAL.
    // An empty string is equal to an unspecified field value.
    string fs_type = 1;

    // The mount options that can be used for the volume. This field is
    // OPTIONAL. `mount_flags` MAY contain sensitive information.
    // Therefore, the CO and the Plugin MUST NOT leak this information
    // to untrusted entities. The total size of this repeated field
    // SHALL NOT exceed 4 KiB.
    repeated string mount_flags = 2;

    // If SP has VOLUME_MOUNT_GROUP node capability and CO provides
    // this field then SP MUST ensure that the volume_mount_group
    // parameter is passed as the group identifier to the underlying
    // operating system mount system call, with the understanding
    // that the set of available mount call parameters and/or
    // mount implementations may vary across operating systems.
    // Additionally, new file and/or directory entries written to
    // the underlying filesystem SHOULD be permission-labeled in such a
    // manner, unless otherwise modified by a workload, that they are
    // both readable and writable by said mount group identifier.
    // This is an OPTIONAL field.
    string volume_mount_group = 3;
  }

  // Specify how a volume can be accessed.
  message AccessMode {
    enum Mode {
      UNKNOWN = 0;

      // Can only be published once as read/write on a single node, at
      // any given time.
      SINGLE_NODE_WRITER = 1;

      // Can only be published once as readonly on a single node, at
      // any given time.
      SINGLE_NODE_READER_ONLY = 2;

      // Can be published as readonly at multiple nodes simultaneously.
      MULTI_NODE_READER_ONLY = 3;

      // Can be published at multiple nodes simultaneously. Only one of
      // the node can be used as read/write. The rest will be readonly.
      MULTI_NODE_SINGLE_WRITER = 4;

      // Can be published as read/write at multiple nodes
      // simultaneously.
      MULTI_NODE_MULTI_WRITER = 5;

      // Can only be published once as read/write at a single workload
      // on a single node, at any given time. SHOULD be used instead of
      // SINGLE_NODE_WRITER for COs using the experimental
      // SINGLE_NODE_MULTI_WRITER capability.
      SINGLE_NODE_SINGLE_WRITER = 6 [(alpha_enum_value) = true];

      // Can be published as read/write at multiple workloads on a
      // single node simultaneously. SHOULD be used instead of
      // SINGLE_NODE_WRITER for COs using the experimental
      // SINGLE_NODE_MULTI_WRITER capability.
      SINGLE_NODE_MULTI_WRITER = 7 [(alpha_enum_value) = true];
    }

    // This field is REQUIRED.
    Mode mode = 1;
  }

  // Specifies what API the volume will be accessed using. One of the
  // following fields MUST be specified.
  oneof access_type {
    BlockVolume block = 1;
    MountVolume mount = 2;
  }

  // This is a REQUIRED field.
  AccessMode access_mode = 3;
}

// The capacity of the storage space in bytes. To specify an exact size,
// `required_bytes` and `limit_bytes` SHALL be set to the same value. At
// least one of the these fields MUST be specified.
message CapacityRange {
  // Volume MUST be at least this big. This field is OPTIONAL.
  // A value of 0 is equal to an unspecified field value.
  // The value of this field MUST NOT be negative.
  int64 required_bytes = 1;

  // Volume MUST not be bigger than this. This field is OPTIONAL.
  // A value of 0 is equal to an unspecified field value.
  // The value of this field MUST NOT be negative.
  int64 limit_bytes = 2;
}

// Information about a specific volume.
message Volume {
  // The capacity of the volume in bytes. This field is OPTIONAL. If not
  // set (value of 0), it indicates that the capacity of the volume is
  // unknown (e.g., NFS share).
  // The value of this field MUST NOT be negative.
  int64 capacity_bytes = 1;

  // The identifier for this volume, generated by the plugin.
  // This field is REQUIRED.
  // This field MUST contain enough information to uniquely identify
  // this specific volume vs all other volumes supported by this plugin.
  // This field SHALL be used by the CO in subsequent calls to refer to
  // this volume.
  // The SP is NOT responsible for global uniqueness of volume_id across
  // multiple SPs.
  string volume_id = 2;

  // Opaque static properties of the volume. SP MAY use this field to
  // ensure subsequent volume validation and publishing calls have
  // contextual information.
  // The contents of this field SHALL be opaque to a CO.
  // The contents of this field SHALL NOT be mutable.
  // The contents of this field SHALL be safe for the CO to cache.
  // The contents of this field SHOULD NOT contain sensitive
  // information.
  // The contents of this field SHOULD NOT be used for uniquely
  // identifying a volume. The `volume_id` alone SHOULD be sufficient to
  // identify the volume.
  // A volume uniquely identified by `volume_id` SHALL always report the
  // same volume_context.
  // This field is OPTIONAL and when present MUST be passed to volume
  // validation and publishing calls.
  map<string, string> volume_context = 3;

  // If specified, indicates that the volume is not empty and is
  // pre-populated with data from the specified source.
  // This field is OPTIONAL.
  VolumeContentSource content_source = 4;

  // Specifies where (regions, zones, racks, etc.) the provisioned
  // volume is accessible from.
  // A plugin that returns this field MUST also set the
  // VOLUME_ACCESSIBILITY_CONSTRAINTS plugin capability.
  // An SP MAY specify multiple topologies to indicate the volume is
  // accessible from multiple locations.
  // COs MAY use this information along with the topology information
  // returned by NodeGetInfo to ensure that a given volume is accessible
  // from a given node when scheduling workloads.
  // This field is OPTIONAL. If it is not specified, the CO MAY assume
  // the volume is equally accessible from all nodes in the cluster and
  // MAY schedule workloads referencing the volume on any available
  // node.
  //
  // Example 1:
  //   accessible_topology = {"region": "R1", "zone": "Z2"}
  // Indicates a volume accessible only from the "region" "R1" and the
  // "zone" "Z2".
  //
  // Example 2:
  //   accessible_topology =
  //     {"region": "R1", "zone": "Z2"},
  //     {"region": "R1", "zone": "Z3"}
  // Indicates a volume accessible from both "zone" "Z2" and "zone" "Z3"
  // in the "region" "R1".
  repeated Topology accessible_topology = 5;
}

message TopologyRequirement {
  // Specifies the list of topologies the provisioned volume MUST be
  // accessible from.
  // This field is OPTIONAL. If TopologyRequirement is specified either
  // requisite or preferred or both MUST be specified.
  //
  // If requisite is specified, the provisioned volume MUST be
  // accessible from at least one of the requisite topologies.
  //
  // Given
  //   x = number of topologies provisioned volume is accessible from
  //   n = number of requisite topologies
  // The CO MUST ensure n >= 1. The SP MUST ensure x >= 1
  // If x==n, then the SP MUST make the provisioned volume available to
  // all topologies from the list of requisite topologies. If it is
  // unable to do so, the SP MUST fail the CreateVolume call.
  // For example, if a volume should be accessible from a single zone,
  // and requisite =
  //   {"region": "R1", "zone": "Z2"}
  // then the provisioned volume MUST be accessible from the "region"
  // "R1" and the "zone" "Z2".
  // Similarly, if a volume should be accessible from two zones, and
  // requisite =
  //   {"region": "R1", "zone": "Z2"},
  //   {"region": "R1", "zone": "Z3"}
  // then the provisioned volume MUST be accessible from the "region"
  // "R1" and both "zone" "Z2" and "zone" "Z3".
  //
  // If x<n, then the SP SHALL choose x unique topologies from the list
  // of requisite topologies. If it is unable to do so, the SP MUST fail
  // the CreateVolume call.
  // For example, if a volume should be accessible from a single zone,
  // and requisite =
  //   {"region": "R1", "zone": "Z2"},
  //   {"region": "R1", "zone": "Z3"}
  // then the SP may choose to make the provisioned volume available in
  // either the "zone" "Z2" or the "zone" "Z3" in the "region" "R1".
  // Similarly, if a volume should be accessible from two zones, and
  // requisite =
  //   {"region": "R1", "zone": "Z2"},
  //   {"region": "R1", "zone": "Z3"},
  //   {"region": "R1", "zone": "Z4"}
  // then the provisioned volume MUST be accessible from any combination
  // of two unique topologies: e.g. "R1/Z2" and "R1/Z3", or "R1/Z2" and
  //  "R1/Z4", or "R1/Z3" and "R1/Z4".
  //
  // If x>n, then the SP MUST make the provisioned volume available from
  // all topologies from the list of requisite topologies and MAY choose
  // the remaining x-n unique topologies from the list of all possible
  // topologies. If it is unable to do so, the SP MUST fail the
  // CreateVolume call.
  // For example, if a volume should be accessible from two zones, and
  // requisite =
  //   {"region": "R1", "zone": "Z2"}
  // then the provisioned volume MUST be accessible from the "region"
  // "R1" and the "zone" "Z2" and the SP may select the second zone
  // independently, e.g. "R1/Z4".
  repeated Topology requisite = 1;

  // Specifies the list of topologies the CO would prefer the volume to
  // be provisioned in.
  //
  // This field is OPTIONAL. If TopologyRequirement is specified either
  // requisite or preferred or both MUST be specified.
  //
  // An SP MUST attempt to make the provisioned volume available using
  // the preferred topologies in order from first to last.
  //
  // If requisite is specified, all topologies in preferred list MUST
  // also be present in the list of requisite topologies.
  //
  // If the SP is unable to to make the provisioned volume available
  // from any of the preferred topologies, the SP MAY choose a topology
  // from the list of requisite topologies.
  // If the list of requisite topologies is not specified, then the SP
  // MAY choose from the list of all possible topologies.
  // If the list of requisite topologies is specified and the SP is
  // unable to to make the provisioned volume available from any of the
  // requisite topologies it MUST fail the CreateVolume call.
  //
  // Example 1:
  // Given a volume should be accessible from a single zone, and
  // requisite =
  //   {"region": "R1", "zone": "Z2"},
  //   {"region": "R1", "zone": "Z3"}
  // preferred =
  //   {"region": "R1", "zone": "Z3"}
  // then the SP SHOULD first attempt to make the provisioned volume
  // available from "zone" "Z3" in the "region" "R1" and fall back to
  // "zone" "Z2" in the "region" "R1" if that is not possible.
  //
  // Example 2:
  // Given a volume should be accessible from a single zone, and
  // requisite =
  //   {"region": "R1", "zone": "Z2"},
  //   {"region": "R1", "zone": "Z3"},
  //   {"region": "R1", "zone": "Z4"},
  //   {"region": "R1", "zone": "Z5"}
  // preferred =
  //   {"region": "R1", "zone": "Z4"},
  //   {"region": "R1", "zone": "Z2"}
  // then the SP SHOULD first attempt to make the provisioned volume
  // accessible from "zone" "Z4" in the "region" "R1" and fall back to
  // "zone" "Z2" in the "region" "R1" if that is not possible. If that
  // is not possible, the SP may choose between either the "zone"
  // "Z3" or "Z5" in the "region" "R1".
  //
  // Example 3:
  // Given a volume should be accessible from TWO zones (because an
  // opaque parameter in CreateVolumeRequest, for example, specifies
  // the volume is accessible from two zones, aka synchronously
  // replicated), and
  // requisite =
  //   {"region": "R1", "zone": "Z2"},
  //   {"region": "R1", "zone": "Z3"},
  //   {"region": "R1", "zone": "Z4"},
  //   {"region": "R1", "zone": "Z5"}
  // preferred =
  //   {"region": "R1", "zone": "Z5"},
  //   {"region": "R1", "zone": "Z3"}
  // then the SP SHOULD first attempt to make the provisioned volume
  // accessible from the combination of the two "zones" "Z5" and "Z3" in
  // the "region" "R1". If that's not possible, it should fall back to
  // a combination of "Z5" and other possibilities from the list of
  // requisite. If that's not possible, it should fall back  to a
  // combination of "Z3" and other possibilities from the list of
  // requisite. If that's not possible, it should fall back  to a
  // combination of other possibilities from the list of requisite.
  repeated Topology preferred = 2;
}

// Topology is a map of topological domains to topological segments.
// A topological domain is a sub-division of a cluster, like "region",
// "zone", "rack", etc.
// A topological segment is a specific instance of a topological domain,
// like "zone3", "rack3", etc.
// For example {"com.company/zone": "Z1", "com.company/rack": "R3"}
// Valid keys have two segments: an OPTIONAL prefix and name, separated
// by a slash (/), for example: "com.company.example/zone".
// The key name segment is REQUIRED. The prefix is OPTIONAL.
// The key name MUST be 63 characters or less, begin and end with an
// alphanumeric character ([a-z0-9A-Z]), and contain only dashes (-),
// underscores (_), dots (.), or alphanumerics in between, for example
// "zone".
// The key prefix MUST be 63 characters or less, begin and end with a
// lower-case alphanumeric character ([a-z0-9]), contain only
// dashes (-), dots (.), or lower-case alphanumerics in between, and
// follow domain name notation format
// (https://tools.ietf.org/html/rfc1035#section-2.3.1).
// The key prefix SHOULD include the plugin's host company name and/or
// the plugin name, to minimize the possibility of collisions with keys
// from other plugins.
// If a key prefix is specified, it MUST be identical across all
// topology keys returned by the SP (across all RPCs).
// Keys MUST be case-insensitive. Meaning the keys "Zone" and "zone"
// MUST not both exist.
// Each value (topological segment) MUST contain 1 or more strings.
// Each string MUST be 63 characters or less and begin and end with an
// alphanumeric character with '-', '_', '.', or alphanumerics in
// between.
message Topology {
  map<string, string> segments = 1;
}
message DeleteVolumeRequest {
  // The ID of the volume to be deprovisioned.
  // This field is REQUIRED.
  string volume_id = 1;

  // Secrets required by plugin to complete volume deletion request.
  // This field is OPTIONAL. Refer to the `Secrets Requirements`
  // section on how to use this field.
  map<string, string> secrets = 2 [(csi_secret) = true];
}

message DeleteVolumeResponse {
  // Intentionally empty.
}
message ControllerPublishVolumeRequest {
  // The ID of the volume to be used on a node.
  // This field is REQUIRED.
  string volume_id = 1;

  // The ID of the node. This field is REQUIRED. The CO SHALL set this
  // field to match the node ID returned by `NodeGetInfo`.
  string node_id = 2;

  // Volume capability describing how the CO intends to use this volume.
  // SP MUST ensure the CO can use the published volume as described.
  // Otherwise SP MUST return the appropriate gRPC error code.
  // This is a REQUIRED field.
  VolumeCapability volume_capability = 3;

  // Indicates SP MUST publish the volume in readonly mode.
  // CO MUST set this field to false if SP does not have the
  // PUBLISH_READONLY controller capability.
  // This is a REQUIRED field.
  bool readonly = 4;

  // Secrets required by plugin to complete controller publish volume
  // request. This field is OPTIONAL. Refer to the
  // `Secrets Requirements` section on how to use this field.
  map<string, string> secrets = 5 [(csi_secret) = true];

  // Volume context as returned by SP in
  // CreateVolumeResponse.Volume.volume_context.
  // This field is OPTIONAL and MUST match the volume_context of the
  // volume identified by `volume_id`.
  map<string, string> volume_context = 6;
}

message ControllerPublishVolumeResponse {
  // Opaque static publish properties of the volume. SP MAY use this
  // field to ensure subsequent `NodeStageVolume` or `NodePublishVolume`
  // calls calls have contextual information.
  // The contents of this field SHALL be opaque to a CO.
  // The contents of this field SHALL NOT be mutable.
  // The contents of this field SHALL be safe for the CO to cache.
  // The contents of this field SHOULD NOT contain sensitive
  // information.
  // The contents of this field SHOULD NOT be used for uniquely
  // identifying a volume. The `volume_id` alone SHOULD be sufficient to
  // identify the volume.
  // This field is OPTIONAL and when present MUST be passed to
  // subsequent `NodeStageVolume` or `NodePublishVolume` calls
  map<string, string> publish_context = 1;
}
message ControllerUnpublishVolumeRequest {
  // The ID of the volume. This field is REQUIRED.
  string volume_id = 1;

  // The ID of the node. This field is OPTIONAL. The CO SHOULD set this
  // field to match the node ID returned by `NodeGetInfo` or leave it
  // unset. If the value is set, the SP MUST unpublish the volume from
  // the specified node. If the value is unset, the SP MUST unpublish
  // the volume from all nodes it is published to.
  string node_id = 2;

  // Secrets required by plugin to complete controller unpublish volume
  // request. This SHOULD be the same secrets passed to the
  // ControllerPublishVolume call for the specified volume.
  // This field is OPTIONAL. Refer to the `Secrets Requirements`
  // section on how to use this field.
  map<string, string> secrets = 3 [(csi_secret) = true];
}

message ControllerUnpublishVolumeResponse {
  // Intentionally empty.
}
message ValidateVolumeCapabilitiesRequest {
  // The ID of the volume to check. This field is REQUIRED.
  string volume_id = 1;

  // Volume context as returned by SP in
  // CreateVolumeResponse.Volume.volume_context.
  // This field is OPTIONAL and MUST match the volume_context of the
  // volume identified by `volume_id`.
  map<string, string> volume_context = 2;

  // The capabilities that the CO wants to check for the volume. This
  // call SHALL return "confirmed" only if all the volume capabilities
  // specified below are supported. This field is REQUIRED.
  repeated VolumeCapability volume_capabilities = 3;

  // See CreateVolumeRequest.parameters.
  // This field is OPTIONAL.
  map<string, string> parameters = 4;

  // Secrets required by plugin to complete volume validation request.
  // This field is OPTIONAL. Refer to the `Secrets Requirements`
  // section on how to use this field.
  map<string, string> secrets = 5 [(csi_secret) = true];

  // See CreateVolumeRequest.mutable_parameters.
  // This field is OPTIONAL.
  map<string, string> mutable_parameters = 6;
}

message ValidateVolumeCapabilitiesResponse {
  message Confirmed {
    // Volume context validated by the plugin.
    // This field is OPTIONAL.
    map<string, string> volume_context = 1;

    // Volume capabilities supported by the plugin.
    // This field is REQUIRED.
    repeated VolumeCapability volume_capabilities = 2;

    // The volume creation parameters validated by the plugin.
    // This field is OPTIONAL.
    map<string, string> parameters = 3;

    // The volume creation mutable_parameters validated by the plugin.
    // This field is OPTIONAL.
    map<string, string> mutable_parameters = 4;
  }

  // Confirmed indicates to the CO the set of capabilities that the
  // plugin has validated. This field SHALL only be set to a non-empty
  // value for successful validation responses.
  // For successful validation responses, the CO SHALL compare the
  // fields of this message to the originally requested capabilities in
  // order to guard against an older plugin reporting "valid" for newer
  // capability fields that it does not yet understand.
  // This field is OPTIONAL.
  Confirmed confirmed = 1;

  // Message to the CO if `confirmed` above is empty. This field is
  // OPTIONAL.
  // An empty string is equal to an unspecified field value.
  string message = 2;
}
message ListVolumesRequest {
  // If specified (non-zero value), the Plugin MUST NOT return more
  // entries than this number in the response. If the actual number of
  // entries is more than this number, the Plugin MUST set `next_token`
  // in the response which can be used to get the next page of entries
  // in the subsequent `ListVolumes` call. This field is OPTIONAL. If
  // not specified (zero value), it means there is no restriction on the
  // number of entries that can be returned.
  // The value of this field MUST NOT be negative.
  int32 max_entries = 1;

  // A token to specify where to start paginating. Set this field to
  // `next_token` returned by a previous `ListVolumes` call to get the
  // next page of entries. This field is OPTIONAL.
  // An empty string is equal to an unspecified field value.
  string starting_token = 2;
}

message ListVolumesResponse {
  message VolumeStatus{
    // A list of all `node_id` of nodes that the volume in this entry
    // is controller published on.
    // This field is OPTIONAL. If it is not specified and the SP has
    // the LIST_VOLUMES_PUBLISHED_NODES controller capability, the CO
    // MAY assume the volume is not controller published to any nodes.
    // If the field is not specified and the SP does not have the
    // LIST_VOLUMES_PUBLISHED_NODES controller capability, the CO MUST
    // not interpret this field.
    // published_node_ids MAY include nodes not published to or
    // reported by the SP. The CO MUST be resilient to that.
    repeated string published_node_ids = 1;

    // Information about the current condition of the volume.
    // This field is OPTIONAL.
    // This field MUST be specified if the
    // VOLUME_CONDITION controller capability is supported.
    VolumeCondition volume_condition = 2 [(alpha_field) = true];
  }

  message Entry {
    // This field is REQUIRED
    Volume volume = 1;

    // This field is OPTIONAL. This field MUST be specified if the
    // LIST_VOLUMES_PUBLISHED_NODES controller capability is
    // supported.
    VolumeStatus status = 2;
  }

  repeated Entry entries = 1;

  // This token allows you to get the next page of entries for
  // `ListVolumes` request. If the number of entries is larger than
  // `max_entries`, use the `next_token` as a value for the
  // `starting_token` field in the next `ListVolumes` request. This
  // field is OPTIONAL.
  // An empty string is equal to an unspecified field value.
  string next_token = 2;
}
message ControllerGetVolumeRequest {
  option (alpha_message) = true;

  // The ID of the volume to fetch current volume information for.
  // This field is REQUIRED.
  string volume_id = 1;
}

message ControllerGetVolumeResponse {
  option (alpha_message) = true;

  message VolumeStatus{
    // A list of all the `node_id` of nodes that this volume is
    // controller published on.
    // This field is OPTIONAL.
    // This field MUST be specified if the LIST_VOLUMES_PUBLISHED_NODES
    // controller capability is supported.
    // published_node_ids MAY include nodes not published to or
    // reported by the SP. The CO MUST be resilient to that.
    repeated string published_node_ids = 1;

    // Information about the current condition of the volume.
    // This field is OPTIONAL.
    // This field MUST be specified if the
    // VOLUME_CONDITION controller capability is supported.
    VolumeCondition volume_condition = 2;
  }

  // This field is REQUIRED
  Volume volume = 1;

  // This field is REQUIRED.
  VolumeStatus status = 2;
}
message ControllerModifyVolumeRequest {
  // Contains identity information for the existing volume.
  // This field is REQUIRED.
  string volume_id = 1;

  // Secrets required by plugin to complete modify volume request.
  // This field is OPTIONAL. Refer to the `Secrets Requirements`
  // section on how to use this field.
  map<string, string> secrets = 2 [(csi_secret) = true];

  // Plugin specific volume attributes to mutate, passed in as 
  // opaque key-value pairs. 
  // This field is REQUIRED. The Plugin is responsible for
  // parsing and validating these parameters. COs will treat these
  // as opaque. The CO SHOULD specify the intended values of all mutable
  // parameters it intends to modify. SPs MUST NOT modify volumes based
  // on the absence of keys, only keys that are specified should result
  // in modifications to the volume.
  map<string, string> mutable_parameters = 3;
}

message ControllerModifyVolumeResponse {
}

message GetCapacityRequest {
  // If specified, the Plugin SHALL report the capacity of the storage
  // that can be used to provision volumes that satisfy ALL of the
  // specified `volume_capabilities`. These are the same
  // `volume_capabilities` the CO will use in `CreateVolumeRequest`.
  // This field is OPTIONAL.
  repeated VolumeCapability volume_capabilities = 1;

  // If specified, the Plugin SHALL report the capacity of the storage
  // that can be used to provision volumes with the given Plugin
  // specific `parameters`. These are the same `parameters` the CO will
  // use in `CreateVolumeRequest`. This field is OPTIONAL.
  map<string, string> parameters = 2;

  // If specified, the Plugin SHALL report the capacity of the storage
  // that can be used to provision volumes that in the specified
  // `accessible_topology`. This is the same as the
  // `accessible_topology` the CO returns in a `CreateVolumeResponse`.
  // This field is OPTIONAL. This field SHALL NOT be set unless the
  // plugin advertises the VOLUME_ACCESSIBILITY_CONSTRAINTS capability.
  Topology accessible_topology = 3;
}

message GetCapacityResponse {
  // The available capacity, in bytes, of the storage that can be used
  // to provision volumes. If `volume_capabilities` or `parameters` is
  // specified in the request, the Plugin SHALL take those into
  // consideration when calculating the available capacity of the
  // storage. This field is REQUIRED.
  // The value of this field MUST NOT be negative.
  int64 available_capacity = 1;

  // The largest size that may be used in a
  // CreateVolumeRequest.capacity_range.required_bytes field
  // to create a volume with the same parameters as those in
  // GetCapacityRequest.
  //
  // If `volume_capabilities` or `parameters` is
  // specified in the request, the Plugin SHALL take those into
  // consideration when calculating the minimum volume size of the
  // storage.
  //
  // This field is OPTIONAL. MUST NOT be negative.
  // The Plugin SHOULD provide a value for this field if it has
  // a maximum size for individual volumes and leave it unset
  // otherwise. COs MAY use it to make decision about
  // where to create volumes.
  google.protobuf.Int64Value maximum_volume_size = 2;

  // The smallest size that may be used in a
  // CreateVolumeRequest.capacity_range.limit_bytes field
  // to create a volume with the same parameters as those in
  // GetCapacityRequest.
  //
  // If `volume_capabilities` or `parameters` is
  // specified in the request, the Plugin SHALL take those into
  // consideration when calculating the maximum volume size of the
  // storage.
  //
  // This field is OPTIONAL. MUST NOT be negative.
  // The Plugin SHOULD provide a value for this field if it has
  // a minimum size for individual volumes and leave it unset
  // otherwise. COs MAY use it to make decision about
  // where to create volumes.
  google.protobuf.Int64Value minimum_volume_size = 3
    [(alpha_field) = true];
}
message ControllerGetCapabilitiesRequest {
  // Intentionally empty.
}

message ControllerGetCapabilitiesResponse {
  // All the capabilities that the controller service supports. This
  // field is OPTIONAL.
  repeated ControllerServiceCapability capabilities = 1;
}

// Specifies a capability of the controller service.
message ControllerServiceCapability {
  message RPC {
    enum Type {
      UNKNOWN = 0;
      CREATE_DELETE_VOLUME = 1;
      PUBLISH_UNPUBLISH_VOLUME = 2;
      LIST_VOLUMES = 3;
      GET_CAPACITY = 4;
      // Currently the only way to consume a snapshot is to create
      // a volume from it. Therefore plugins supporting
      // CREATE_DELETE_SNAPSHOT MUST support creating volume from
      // snapshot.
      CREATE_DELETE_SNAPSHOT = 5;
      LIST_SNAPSHOTS = 6;

      // Plugins supporting volume cloning at the storage level MAY
      // report this capability. The source volume MUST be managed by
      // the same plugin. Not all volume sources and parameters
      // combinations MAY work.
      CLONE_VOLUME = 7;

      // Indicates the SP supports ControllerPublishVolume.readonly
      // field.
      PUBLISH_READONLY = 8;

      // See VolumeExpansion for details.
      EXPAND_VOLUME = 9;

      // Indicates the SP supports the
      // ListVolumesResponse.entry.published_node_ids field and the
      // ControllerGetVolumeResponse.published_node_ids field.
      // The SP MUST also support PUBLISH_UNPUBLISH_VOLUME.
      LIST_VOLUMES_PUBLISHED_NODES = 10;

      // Indicates that the Controller service can report volume
      // conditions.
      // An SP MAY implement `VolumeCondition` in only the Controller
      // Plugin, only the Node Plugin, or both.
      // If `VolumeCondition` is implemented in both the Controller and
      // Node Plugins, it SHALL report from different perspectives.
      // If for some reason Controller and Node Plugins report
      // misaligned volume conditions, CO SHALL assume the worst case
      // is the truth.
      // Note that, for alpha, `VolumeCondition` is intended be
      // informative for humans only, not for automation.
      VOLUME_CONDITION = 11 [(alpha_enum_value) = true];

      // Indicates the SP supports the ControllerGetVolume RPC.
      // This enables COs to, for example, fetch per volume
      // condition after a volume is provisioned.
      GET_VOLUME = 12 [(alpha_enum_value) = true];

      // Indicates the SP supports the SINGLE_NODE_SINGLE_WRITER and/or
      // SINGLE_NODE_MULTI_WRITER access modes.
      // These access modes are intended to replace the
      // SINGLE_NODE_WRITER access mode to clarify the number of writers
      // for a volume on a single node. Plugins MUST accept and allow
      // use of the SINGLE_NODE_WRITER access mode when either
      // SINGLE_NODE_SINGLE_WRITER and/or SINGLE_NODE_MULTI_WRITER are
      // supported, in order to permit older COs to continue working.
      SINGLE_NODE_MULTI_WRITER = 13 [(alpha_enum_value) = true];

      // Indicates the SP supports modifying volume with mutable
      // parameters. See ControllerModifyVolume for details.
      MODIFY_VOLUME = 14;

      // Indicates the SP supports the GetSnapshot RPC.
      // This enables COs to fetch an existing snapshot.
      GET_SNAPSHOT = 15 [(alpha_enum_value) = true];
    }

    Type type = 1;
  }

  oneof type {
    // RPC that the controller supports.
    RPC rpc = 1;
  }
}
message CreateSnapshotRequest {
  // The ID of the source volume to be snapshotted.
  // This field is REQUIRED.
  string source_volume_id = 1;

  // The suggested name for the snapshot. This field is REQUIRED for
  // idempotency.
  // Any Unicode string that conforms to the length limit is allowed
  // except those containing the following banned characters:
  // U+0000-U+0008, U+000B, U+000C, U+000E-U+001F, U+007F-U+009F.
  // (These are control characters other than commonly used whitespace.)
  string name = 2;

  // Secrets required by plugin to complete snapshot creation request.
  // This field is OPTIONAL. Refer to the `Secrets Requirements`
  // section on how to use this field.
  map<string, string> secrets = 3 [(csi_secret) = true];

  // Plugin specific parameters passed in as opaque key-value pairs.
  // This field is OPTIONAL. The Plugin is responsible for parsing and
  // validating these parameters. COs will treat these as opaque.
  // Use cases for opaque parameters:
  // - Specify a policy to automatically clean up the snapshot.
  // - Specify an expiration date for the snapshot.
  // - Specify whether the snapshot is readonly or read/write.
  // - Specify if the snapshot should be replicated to some place.
  // - Specify primary or secondary for replication systems that
  //   support snapshotting only on primary.
  map<string, string> parameters = 4;
}

message CreateSnapshotResponse {
  // Contains all attributes of the newly created snapshot that are
  // relevant to the CO along with information required by the Plugin
  // to uniquely identify the snapshot. This field is REQUIRED.
  Snapshot snapshot = 1;
}

// Information about a specific snapshot.
message Snapshot {
  // This is the complete size of the snapshot in bytes. The purpose of
  // this field is to give CO guidance on how much space is needed to
  // create a volume from this snapshot. The size of the volume MUST NOT
  // be less than the size of the source snapshot. This field is
  // OPTIONAL. If this field is not set, it indicates that this size is
  // unknown. The value of this field MUST NOT be negative and a size of
  // zero means it is unspecified.
  int64 size_bytes = 1;

  // The identifier for this snapshot, generated by the plugin.
  // This field is REQUIRED.
  // This field MUST contain enough information to uniquely identify
  // this specific snapshot vs all other snapshots supported by this
  // plugin.
  // This field SHALL be used by the CO in subsequent calls to refer to
  // this snapshot.
  // The SP is NOT responsible for global uniqueness of snapshot_id
  // across multiple SPs.
  string snapshot_id = 2;

  // Identity information for the source volume. Note that creating a
  // snapshot from a snapshot is not supported here so the source has to
  // be a volume. This field is REQUIRED.
  string source_volume_id = 3;

  // Timestamp when the point-in-time snapshot is taken on the storage
  // system. This field is REQUIRED.
  .google.protobuf.Timestamp creation_time = 4;

  // Indicates if a snapshot is ready to use as a
  // `volume_content_source` in a `CreateVolumeRequest`. The default
  // value is false. This field is REQUIRED.
  bool ready_to_use = 5;

  // The ID of the volume group snapshot that this snapshot is part of.
  // It uniquely identifies the group snapshot on the storage system.
  // This field is OPTIONAL.
  // If this snapshot is a member of a volume group snapshot, and it
  // MUST NOT be deleted as a stand alone snapshot, then the SP
  // MUST provide the ID of the volume group snapshot in this field.
  // If provided, CO MUST use this field in subsequent volume group
  // snapshot operations to indicate that this snapshot is part of the
  // specified group snapshot.
  // If not provided, CO SHALL treat the snapshot as independent,
  // and SP SHALL allow it to be deleted separately.
  // If this message is inside a VolumeGroupSnapshot message, the value
  // MUST be the same as the group_snapshot_id in that message.
  string group_snapshot_id = 6;
}
message DeleteSnapshotRequest {
  // The ID of the snapshot to be deleted.
  // This field is REQUIRED.
  string snapshot_id = 1;

  // Secrets required by plugin to complete snapshot deletion request.
  // This field is OPTIONAL. Refer to the `Secrets Requirements`
  // section on how to use this field.
  map<string, string> secrets = 2 [(csi_secret) = true];
}

message DeleteSnapshotResponse {}
// List all snapshots on the storage system regardless of how they were
// created.
message ListSnapshotsRequest {
  // If specified (non-zero value), the Plugin MUST NOT return more
  // entries than this number in the response. If the actual number of
  // entries is more than this number, the Plugin MUST set `next_token`
  // in the response which can be used to get the next page of entries
  // in the subsequent `ListSnapshots` call. This field is OPTIONAL. If
  // not specified (zero value), it means there is no restriction on the
  // number of entries that can be returned.
  // The value of this field MUST NOT be negative.
  int32 max_entries = 1;

  // A token to specify where to start paginating. Set this field to
  // `next_token` returned by a previous `ListSnapshots` call to get the
  // next page of entries. This field is OPTIONAL.
  // An empty string is equal to an unspecified field value.
  string starting_token = 2;

  // Identity information for the source volume. This field is OPTIONAL.
  // It can be used to list snapshots by volume.
  string source_volume_id = 3;

  // Identity information for a specific snapshot. This field is
  // OPTIONAL. It can be used to list only a specific snapshot.
  // ListSnapshots will return with current snapshot information
  // and will not block if the snapshot is being processed after
  // it is cut.
  string snapshot_id = 4;

  // Secrets required by plugin to complete ListSnapshot request.
  // This field is OPTIONAL. Refer to the `Secrets Requirements`
  // section on how to use this field.
  map<string, string> secrets = 5 [(csi_secret) = true];
}

message ListSnapshotsResponse {
  message Entry {
    Snapshot snapshot = 1;
  }

  repeated Entry entries = 1;

  // This token allows you to get the next page of entries for
  // `ListSnapshots` request. If the number of entries is larger than
  // `max_entries`, use the `next_token` as a value for the
  // `starting_token` field in the next `ListSnapshots` request. This
  // field is OPTIONAL.
  // An empty string is equal to an unspecified field value.
  string next_token = 2;
}
message GetSnapshotRequest {
  option (alpha_message) = true;

  // The ID of the snapshot to fetch current snapshot information for.
  // This field is REQUIRED.
  string snapshot_id = 1;

  // Secrets required by plugin to complete GetSnapshot request.
  // This field is OPTIONAL. Refer to the `Secrets Requirements`
  // section on how to use this field.
  map<string, string> secrets = 2 [(csi_secret) = true];
}

message GetSnapshotResponse {
  option (alpha_message) = true;

  // This field is REQUIRED
  Snapshot snapshot = 1;
}
message ControllerExpandVolumeRequest {
  // The ID of the volume to expand. This field is REQUIRED.
  string volume_id = 1;

  // This allows CO to specify the capacity requirements of the volume
  // after expansion. This field is REQUIRED.
  CapacityRange capacity_range = 2;

  // Secrets required by the plugin for expanding the volume.
  // This field is OPTIONAL.
  map<string, string> secrets = 3 [(csi_secret) = true];

  // Volume capability describing how the CO intends to use this volume.
  // This allows SP to determine if volume is being used as a block
  // device or mounted file system. For example - if volume is
  // being used as a block device - the SP MAY set
  // node_expansion_required to false in ControllerExpandVolumeResponse
  // to skip invocation of NodeExpandVolume on the node by the CO.
  // This is an OPTIONAL field.
  VolumeCapability volume_capability = 4;
}

message ControllerExpandVolumeResponse {
  // Capacity of volume after expansion. This field is REQUIRED.
  int64 capacity_bytes = 1;

  // Whether node expansion is required for the volume. When true
  // the CO MUST make NodeExpandVolume RPC call on the node. This field
  // is REQUIRED.
  bool node_expansion_required = 2;
}
message NodeStageVolumeRequest {
  // The ID of the volume to publish. This field is REQUIRED.
  string volume_id = 1;

  // The CO SHALL set this field to the value returned by
  // `ControllerPublishVolume` if the corresponding Controller Plugin
  // has `PUBLISH_UNPUBLISH_VOLUME` controller capability, and SHALL be
  // left unset if the corresponding Controller Plugin does not have
  // this capability. This is an OPTIONAL field.
  map<string, string> publish_context = 2;

  // The path to which the volume MAY be staged. It MUST be an
  // absolute path in the root filesystem of the process serving this
  // request, and MUST be a directory. The CO SHALL ensure that there
  // is only one `staging_target_path` per volume. The CO SHALL ensure
  // that the path is directory and that the process serving the
  // request has `read` and `write` permission to that directory. The
  // CO SHALL be responsible for creating the directory if it does not
  // exist.
  // This is a REQUIRED field.
  // This field overrides the general CSI size limit.
  // SP SHOULD support the maximum path length allowed by the operating
  // system/filesystem, but, at a minimum, SP MUST accept a max path
  // length of at least 128 bytes.
  string staging_target_path = 3;

  // Volume capability describing how the CO intends to use this volume.
  // SP MUST ensure the CO can use the staged volume as described.
  // Otherwise SP MUST return the appropriate gRPC error code.
  // This is a REQUIRED field.
  VolumeCapability volume_capability = 4;

  // Secrets required by plugin to complete node stage volume request.
  // This field is OPTIONAL. Refer to the `Secrets Requirements`
  // section on how to use this field.
  map<string, string> secrets = 5 [(csi_secret) = true];

  // Volume context as returned by SP in
  // CreateVolumeResponse.Volume.volume_context.
  // This field is OPTIONAL and MUST match the volume_context of the
  // volume identified by `volume_id`.
  map<string, string> volume_context = 6;
}

message NodeStageVolumeResponse {
  // Intentionally empty.
}
message NodeUnstageVolumeRequest {
  // The ID of the volume. This field is REQUIRED.
  string volume_id = 1;

  // The path at which the volume was staged. It MUST be an absolute
  // path in the root filesystem of the process serving this request.
  // This is a REQUIRED field.
  // This field overrides the general CSI size limit.
  // SP SHOULD support the maximum path length allowed by the operating
  // system/filesystem, but, at a minimum, SP MUST accept a max path
  // length of at least 128 bytes.
  string staging_target_path = 2;
}

message NodeUnstageVolumeResponse {
  // Intentionally empty.
}
message NodePublishVolumeRequest {
  // The ID of the volume to publish. This field is REQUIRED.
  string volume_id = 1;

  // The CO SHALL set this field to the value returned by
  // `ControllerPublishVolume` if the corresponding Controller Plugin
  // has `PUBLISH_UNPUBLISH_VOLUME` controller capability, and SHALL be
  // left unset if the corresponding Controller Plugin does not have
  // this capability. This is an OPTIONAL field.
  map<string, string> publish_context = 2;

  // The path to which the volume was staged by `NodeStageVolume`.
  // It MUST be an absolute path in the root filesystem of the process
  // serving this request.
  // It MUST be set if the Node Plugin implements the
  // `STAGE_UNSTAGE_VOLUME` node capability.
  // This is an OPTIONAL field.
  // This field overrides the general CSI size limit.
  // SP SHOULD support the maximum path length allowed by the operating
  // system/filesystem, but, at a minimum, SP MUST accept a max path
  // length of at least 128 bytes.
  string staging_target_path = 3;

  // The path to which the volume will be published. It MUST be an
  // absolute path in the root filesystem of the process serving this
  // request. The CO SHALL ensure uniqueness of target_path per volume.
  // The CO SHALL ensure that the parent directory of this path exists
  // and that the process serving the request has `read` and `write`
  // permissions to that parent directory.
  // For volumes with an access type of block, the SP SHALL place the
  // block device at target_path.
  // For volumes with an access type of mount, the SP SHALL place the
  // mounted directory at target_path.
  // Creation of target_path is the responsibility of the SP.
  // This is a REQUIRED field.
  // This field overrides the general CSI size limit.
  // SP SHOULD support the maximum path length allowed by the operating
  // system/filesystem, but, at a minimum, SP MUST accept a max path
  // length of at least 128 bytes.
  string target_path = 4;

  // Volume capability describing how the CO intends to use this volume.
  // SP MUST ensure the CO can use the published volume as described.
  // Otherwise SP MUST return the appropriate gRPC error code.
  // This is a REQUIRED field.
  VolumeCapability volume_capability = 5;

  // Indicates SP MUST publish the volume in readonly mode.
  // This field is REQUIRED.
  bool readonly = 6;

  // Secrets required by plugin to complete node publish volume request.
  // This field is OPTIONAL. Refer to the `Secrets Requirements`
  // section on how to use this field.
  map<string, string> secrets = 7 [(csi_secret) = true];

  // Volume context as returned by SP in
  // CreateVolumeResponse.Volume.volume_context.
  // This field is OPTIONAL and MUST match the volume_context of the
  // volume identified by `volume_id`.
  map<string, string> volume_context = 8;
}

message NodePublishVolumeResponse {
  // Intentionally empty.
}
message NodeUnpublishVolumeRequest {
  // The ID of the volume. This field is REQUIRED.
  string volume_id = 1;

  // The path at which the volume was published. It MUST be an absolute
  // path in the root filesystem of the process serving this request.
  // The SP MUST delete the file or directory it created at this path.
  // This is a REQUIRED field.
  // This field overrides the general CSI size limit.
  // SP SHOULD support the maximum path length allowed by the operating
  // system/filesystem, but, at a minimum, SP MUST accept a max path
  // length of at least 128 bytes.
  string target_path = 2;
}

message NodeUnpublishVolumeResponse {
  // Intentionally empty.
}
message NodeGetVolumeStatsRequest {
  // The ID of the volume. This field is REQUIRED.
  string volume_id = 1;

  // It can be any valid path where volume was previously
  // staged or published.
  // It MUST be an absolute path in the root filesystem of
  // the process serving this request.
  // This is a REQUIRED field.
  // This field overrides the general CSI size limit.
  // SP SHOULD support the maximum path length allowed by the operating
  // system/filesystem, but, at a minimum, SP MUST accept a max path
  // length of at least 128 bytes.
  string volume_path = 2;

  // The path where the volume is staged, if the plugin has the
  // STAGE_UNSTAGE_VOLUME capability, otherwise empty.
  // If not empty, it MUST be an absolute path in the root
  // filesystem of the process serving this request.
  // This field is OPTIONAL.
  // This field overrides the general CSI size limit.
  // SP SHOULD support the maximum path length allowed by the operating
  // system/filesystem, but, at a minimum, SP MUST accept a max path
  // length of at least 128 bytes.
  string staging_target_path = 3;
}

message NodeGetVolumeStatsResponse {
  // This field is OPTIONAL.
  repeated VolumeUsage usage = 1;
  // Information about the current condition of the volume.
  // This field is OPTIONAL.
  // This field MUST be specified if the VOLUME_CONDITION node
  // capability is supported.
  VolumeCondition volume_condition = 2 [(alpha_field) = true];
}

message VolumeUsage {
  enum Unit {
    UNKNOWN = 0;
    BYTES = 1;
    INODES = 2;
  }
  // The available capacity in specified Unit. This field is OPTIONAL.
  // The value of this field MUST NOT be negative.
  int64 available = 1;

  // The total capacity in specified Unit. This field is REQUIRED.
  // The value of this field MUST NOT be negative.
  int64 total = 2;

  // The used capacity in specified Unit. This field is OPTIONAL.
  // The value of this field MUST NOT be negative.
  int64 used = 3;

  // Units by which values are measured. This field is REQUIRED.
  Unit unit = 4;
}

// VolumeCondition represents the current condition of a volume.
message VolumeCondition {
  option (alpha_message) = true;

  // Normal volumes are available for use and operating optimally.
  // An abnormal volume does not meet these criteria.
  // This field is REQUIRED.
  bool abnormal = 1;

  // The message describing the condition of the volume.
  // This field is REQUIRED.
  string message = 2;
}
message NodeGetCapabilitiesRequest {
  // Intentionally empty.
}

message NodeGetCapabilitiesResponse {
  // All the capabilities that the node service supports. This field
  // is OPTIONAL.
  repeated NodeServiceCapability capabilities = 1;
}

// Specifies a capability of the node service.
message NodeServiceCapability {
  message RPC {
    enum Type {
      UNKNOWN = 0;
      STAGE_UNSTAGE_VOLUME = 1;
      // If Plugin implements GET_VOLUME_STATS capability
      // then it MUST implement NodeGetVolumeStats RPC
      // call for fetching volume statistics.
      GET_VOLUME_STATS = 2;
      // See VolumeExpansion for details.
      EXPAND_VOLUME = 3;
      // Indicates that the Node service can report volume conditions.
      // An SP MAY implement `VolumeCondition` in only the Node
      // Plugin, only the Controller Plugin, or both.
      // If `VolumeCondition` is implemented in both the Node and
      // Controller Plugins, it SHALL report from different
      // perspectives.
      // If for some reason Node and Controller Plugins report
      // misaligned volume conditions, CO SHALL assume the worst case
      // is the truth.
      // Note that, for alpha, `VolumeCondition` is intended to be
      // informative for humans only, not for automation.
      VOLUME_CONDITION = 4 [(alpha_enum_value) = true];

      // Indicates the SP supports the SINGLE_NODE_SINGLE_WRITER and/or
      // SINGLE_NODE_MULTI_WRITER access modes.
      // These access modes are intended to replace the
      // SINGLE_NODE_WRITER access mode to clarify the number of writers
      // for a volume on a single node. Plugins MUST accept and allow
      // use of the SINGLE_NODE_WRITER access mode (subject to the
      // processing rules for NodePublishVolume), when either
      // SINGLE_NODE_SINGLE_WRITER and/or SINGLE_NODE_MULTI_WRITER are
      // supported, in order to permit older COs to continue working.
      SINGLE_NODE_MULTI_WRITER = 5 [(alpha_enum_value) = true];

      // Indicates that Node service supports mounting volumes
      // with provided volume group identifier during node stage
      // or node publish RPC calls.
      VOLUME_MOUNT_GROUP = 6;
    }

    Type type = 1;
  }

  oneof type {
    // RPC that the controller supports.
    RPC rpc = 1;
  }
}
message NodeGetInfoRequest {
}

message NodeGetInfoResponse {
  // The identifier of the node as understood by the SP.
  // This field is REQUIRED.
  // This field MUST contain enough information to uniquely identify
  // this specific node vs all other nodes supported by this plugin.
  // This field SHALL be used by the CO in subsequent calls, including
  // `ControllerPublishVolume`, to refer to this node.
  // The SP is NOT responsible for global uniqueness of node_id across
  // multiple SPs.
  // This field overrides the general CSI size limit.
  // The size of this field SHALL NOT exceed 256 bytes. The general
  // CSI size limit, 128 byte, is RECOMMENDED for best backwards
  // compatibility.
  string node_id = 1;

  // Maximum number of volumes that controller can publish to the node.
  // If value is not set or zero CO SHALL decide how many volumes of
  // this type can be published by the controller to the node. The
  // plugin MUST NOT set negative values here.
  // This field is OPTIONAL.
  int64 max_volumes_per_node = 2;

  // Specifies where (regions, zones, racks, etc.) the node is
  // accessible from.
  // A plugin that returns this field MUST also set the
  // VOLUME_ACCESSIBILITY_CONSTRAINTS plugin capability.
  // COs MAY use this information along with the topology information
  // returned in CreateVolumeResponse to ensure that a given volume is
  // accessible from a given node when scheduling workloads.
  // This field is OPTIONAL. If it is not specified, the CO MAY assume
  // the node is not subject to any topological constraint, and MAY
  // schedule workloads that reference any volume V, such that there are
  // no topological constraints declared for V.
  //
  // Example 1:
  //   accessible_topology =
  //     {"region": "R1", "zone": "Z2"}
  // Indicates the node exists within the "region" "R1" and the "zone"
  // "Z2".
  Topology accessible_topology = 3;
}
message NodeExpandVolumeRequest {
  // The ID of the volume. This field is REQUIRED.
  string volume_id = 1;

  // The path on which volume is available. This field is REQUIRED.
  // This field overrides the general CSI size limit.
  // SP SHOULD support the maximum path length allowed by the operating
  // system/filesystem, but, at a minimum, SP MUST accept a max path
  // length of at least 128 bytes.
  string volume_path = 2;

  // This allows CO to specify the capacity requirements of the volume
  // after expansion. If capacity_range is omitted then a plugin MAY
  // inspect the file system of the volume to determine the maximum
  // capacity to which the volume can be expanded. In such cases a
  // plugin MAY expand the volume to its maximum capacity.
  // This field is OPTIONAL.
  CapacityRange capacity_range = 3;

  // The path where the volume is staged, if the plugin has the
  // STAGE_UNSTAGE_VOLUME capability, otherwise empty.
  // If not empty, it MUST be an absolute path in the root
  // filesystem of the process serving this request.
  // This field is OPTIONAL.
  // This field overrides the general CSI size limit.
  // SP SHOULD support the maximum path length allowed by the operating
  // system/filesystem, but, at a minimum, SP MUST accept a max path
  // length of at least 128 bytes.
  string staging_target_path = 4;

  // Volume capability describing how the CO intends to use this volume.
  // This allows SP to determine if volume is being used as a block
  // device or mounted file system. For example - if volume is being
  // used as a block device the SP MAY choose to skip expanding the
  // filesystem in NodeExpandVolume implementation but still perform
  // rest of the housekeeping needed for expanding the volume. If
  // volume_capability is omitted the SP MAY determine
  // access_type from given volume_path for the volume and perform
  // node expansion. This is an OPTIONAL field.
  VolumeCapability volume_capability = 5;

  // Secrets required by plugin to complete node expand volume request.
  // This field is OPTIONAL. Refer to the `Secrets Requirements`
  // section on how to use this field.
  map<string, string> secrets = 6
    [(csi_secret) = true, (alpha_field) = true];
}

message NodeExpandVolumeResponse {
  // The capacity of the volume in bytes. This field is OPTIONAL.
  int64 capacity_bytes = 1;
}
message GroupControllerGetCapabilitiesRequest {
  // Intentionally empty.
}

message GroupControllerGetCapabilitiesResponse {
  // All the capabilities that the group controller service supports.
  // This field is OPTIONAL.
  repeated GroupControllerServiceCapability capabilities = 1;
}

// Specifies a capability of the group controller service.
message GroupControllerServiceCapability {
  message RPC {
    enum Type {
      UNKNOWN = 0;

      // Indicates that the group controller plugin supports
      // creating, deleting, and getting details of a volume
      // group snapshot.
      CREATE_DELETE_GET_VOLUME_GROUP_SNAPSHOT = 1;
    }

    Type type = 1;
  }

  oneof type {
    // RPC that the controller supports.
    RPC rpc = 1;
  }
}
message CreateVolumeGroupSnapshotRequest {
  // The suggested name for the group snapshot. This field is REQUIRED
  // for idempotency.
  // Any Unicode string that conforms to the length limit is allowed
  // except those containing the following banned characters:
  // U+0000-U+0008, U+000B, U+000C, U+000E-U+001F, U+007F-U+009F.
  // (These are control characters other than commonly used whitespace.)
  string name = 1;

  // volume IDs of the source volumes to be snapshotted together.
  // This field is REQUIRED.
  repeated string source_volume_ids = 2;

  // Secrets required by plugin to complete
  // ControllerCreateVolumeGroupSnapshot request.
  // This field is OPTIONAL. Refer to the `Secrets Requirements`
  // section on how to use this field.
  // The secrets provided in this field SHOULD be the same for 
  // all group snapshot operations on the same group snapshot. 
  map<string, string> secrets = 3 [(csi_secret) = true];

  // Plugin specific parameters passed in as opaque key-value pairs.
  // This field is OPTIONAL. The Plugin is responsible for parsing and
  // validating these parameters. COs will treat these as opaque.
  map<string, string> parameters = 4;
}

message CreateVolumeGroupSnapshotResponse {
  // Contains all attributes of the newly created group snapshot.
  // This field is REQUIRED.
  VolumeGroupSnapshot group_snapshot = 1;
}

message VolumeGroupSnapshot {
  // The identifier for this group snapshot, generated by the plugin.
  // This field MUST contain enough information to uniquely identify
  // this specific snapshot vs all other group snapshots supported by
  // this plugin.
  // This field SHALL be used by the CO in subsequent calls to refer to
  // this group snapshot.
  // The SP is NOT responsible for global uniqueness of
  // group_snapshot_id across multiple SPs.
  // This field is REQUIRED.
  string group_snapshot_id = 1;

  // A list of snapshots belonging to this group.
  // This field is REQUIRED.
  repeated Snapshot snapshots = 2;

  // Timestamp of when the volume group snapshot was taken.
  // This field is REQUIRED.
  .google.protobuf.Timestamp creation_time = 3;

  // Indicates if all individual snapshots in the group snapshot
  // are ready to use as a `volume_content_source` in a
  // `CreateVolumeRequest`. The default value is false.
  // If any snapshot in the list of snapshots in this message have
  // ready_to_use set to false, the SP MUST set this field to false.
  // If all of the snapshots in the list of snapshots in this message
  // have ready_to_use set to true, the SP SHOULD set this field to
  // true.
  // This field is REQUIRED.
  bool ready_to_use = 4;
}
message DeleteVolumeGroupSnapshotRequest {
  // The ID of the group snapshot to be deleted.
  // This field is REQUIRED.
  string group_snapshot_id = 1;

  // A list of snapshot IDs that are part of this group snapshot.
  // If SP does not need to rely on this field to delete the snapshots
  // in the group, it SHOULD check this field and report an error
  // if it has the ability to detect a mismatch.
  // Some SPs require this list to delete the snapshots in the group.
  // If SP needs to use this field to delete the snapshots in the
  // group, it MUST report an error if it has the ability to detect
  // a mismatch.
  // This field is REQUIRED.
  repeated string snapshot_ids = 2;

  // Secrets required by plugin to complete group snapshot deletion
  // request.
  // This field is OPTIONAL. Refer to the `Secrets Requirements`
  // section on how to use this field.
  // The secrets provided in this field SHOULD be the same for
  // all group snapshot operations on the same group snapshot.
  map<string, string> secrets = 3 [(csi_secret) = true];
}

message DeleteVolumeGroupSnapshotResponse {
  // Intentionally empty.
}
message GetVolumeGroupSnapshotRequest {
  // The ID of the group snapshot to fetch current group snapshot
  // information for.
  // This field is REQUIRED.
  string group_snapshot_id = 1;

  // A list of snapshot IDs that are part of this group snapshot.
  // If SP does not need to rely on this field to get the snapshots
  // in the group, it SHOULD check this field and report an error
  // if it has the ability to detect a mismatch.
  // Some SPs require this list to get the snapshots in the group.
  // If SP needs to use this field to get the snapshots in the
  // group, it MUST report an error if it has the ability to detect
  // a mismatch.
  // This field is REQUIRED.
  repeated string snapshot_ids = 2;

  // Secrets required by plugin to complete
  // GetVolumeGroupSnapshot request.
  // This field is OPTIONAL. Refer to the `Secrets Requirements`
  // section on how to use this field.
  // The secrets provided in this field SHOULD be the same for
  // all group snapshot operations on the same group snapshot.
  map<string, string> secrets = 3 [(csi_secret) = true];
}

message GetVolumeGroupSnapshotResponse {
  // This field is REQUIRED
  VolumeGroupSnapshot group_snapshot = 1;
}
// BlockMetadata specifies a data range.
message BlockMetadata {
  // This is the zero based byte position in the volume or snapshot,
  // measured from the start of the object.
  // This field is REQUIRED.
  int64 byte_offset = 1;

  // This is the size of the data range.
  // size_bytes MUST be greater than zero.
  // This field is REQUIRED.
  int64 size_bytes = 2;
}
enum BlockMetadataType {
  UNKNOWN = 0;

  // The FIXED_LENGTH value indicates that data ranges are
  // returned in fixed size blocks.
  FIXED_LENGTH = 1;

  // The VARIABLE_LENGTH value indicates that data ranges
  // are returned in potentially variable sized extents.
  VARIABLE_LENGTH = 2;
}
// The GetMetadataAllocatedRequest message is used to solicit metadata
// on the allocated blocks of a snapshot: i.e. this identifies the
// data ranges that have valid data as they were the target of some
// previous write operation on the volume.
message GetMetadataAllocatedRequest {
  // This is the identifier of the snapshot.
  // This field is REQUIRED.
  string snapshot_id = 1;

  // This indicates the zero based starting byte position in the volume
  // snapshot from which the result should be computed.
  // It is intended to be used to continue a previously interrupted
  // call.
  // The CO SHOULD specify this value to be the offset of the byte
  // position immediately after the last byte of the last data range
  // received, if continuing an interrupted operation, or zero if not.
  // The SP MUST ensure that the returned response stream does not
  // contain BlockMetadata tuples that end before the requested
  // starting_offset: i.e. if S is the requested starting_offset, and
  // B0 is block_metadata[0] of the first message in the response
  // stream, then (S < B0.byte_offset + B0.size_bytes) must be true.
  // This field is REQUIRED.
  int64 starting_offset = 2;

  // This is an optional parameter, and if non-zero it specifies the
  // maximum number of tuples to be returned in each
  // GetMetadataAllocatedResponse message returned by the RPC stream.
  // The plugin will determine an appropriate value if 0, and is
  // always free to send less than the requested value.
  // This field is OPTIONAL.
  int32 max_results = 3;

  // Secrets required by plugin to complete the request.
  // This field is OPTIONAL. Refer to the `Secrets Requirements`
  // section on how to use this field.
  map<string, string> secrets = 4 [(csi_secret) = true];
}

// GetMetadataAllocatedResponse messages are returned in a gRPC stream.
// Cumulatively, they provide information on the allocated data
// ranges in the snapshot.
message GetMetadataAllocatedResponse {
  // This specifies the style used in the BlockMetadata sequence.
  // This value must be the same in all such messages returned by
  // the stream.
  // If block_metadata_type is FIXED_LENGTH, then the size_bytes field
  // of each message in the block_metadata list MUST be constant.
  // This field is REQUIRED.
  BlockMetadataType block_metadata_type = 1;

  // This returns the capacity of the underlying volume in bytes.
  // This value must be the same in all such messages returned by
  // the stream.
  // This field is REQUIRED.
  int64 volume_capacity_bytes = 2;

  // This is a list of data range tuples.
  // If the value of max_results in the GetMetadataAllocatedRequest
  // message is greater than zero, then the number of entries in this
  // list MUST be less than or equal to that value.
  // The SP MUST respect the value of starting_offset in the request.
  // The byte_offset fields of adjacent BlockMetadata messages
  // MUST be strictly increasing and messages MUST NOT overlap:
  // i.e. for any two BlockMetadata messages, A and B, if A is returned
  // before B, then (A.byte_offset + A.size_bytes <= B.byte_offset)
  // MUST be true.
  // This MUST also be true if A and B are from block_metadata lists in
  // different GetMetadataAllocatedResponse messages in the gRPC stream.
  // This field is OPTIONAL.
  repeated BlockMetadata block_metadata = 3;
}
// The GetMetadataDeltaRequest message is used to solicit metadata on
// the data ranges that have changed between two snapshots.
message GetMetadataDeltaRequest {
  // This is the identifier of the snapshot against which changes
  // are to be computed.
  // This field is REQUIRED.
  string base_snapshot_id = 1;

  // This is the identifier of a second snapshot in the same volume,
  // created after the base snapshot.
  // This field is REQUIRED.
  string target_snapshot_id = 2;

  // This indicates the zero based starting byte position in the volume
  // snapshot from which the result should be computed.
  // It is intended to be used to continue a previously interrupted
  // call.
  // The CO SHOULD specify this value to be the offset of the byte
  // position immediately after the last byte of the last data range
  // received, if continuing an interrupted operation, or zero if not.
  // The SP MUST ensure that the returned response stream does not
  // contain BlockMetadata tuples that end before the requested
  // starting_offset: i.e. if S is the requested starting_offset, and
  // B0 is block_metadata[0] of the first message in the response
  // stream, then (S < B0.byte_offset + B0.size_bytes) must be true.
  // This field is REQUIRED.
  int64 starting_offset = 3;

  // This is an optional parameter, and if non-zero it specifies the
  // maximum number of tuples to be returned in each
  // GetMetadataDeltaResponse message returned by the RPC stream.
  // The plugin will determine an appropriate value if 0, and is
  // always free to send less than the requested value.
  // This field is OPTIONAL.
  int32 max_results = 4;

  // Secrets required by plugin to complete the request.
  // This field is OPTIONAL. Refer to the `Secrets Requirements`
  // section on how to use this field.
  map<string, string> secrets = 5 [(csi_secret) = true];
}

// GetMetadataDeltaResponse messages are returned in a gRPC stream.
// Cumulatively, they provide information on the data ranges that
// have changed between the base and target snapshots specified
// in the GetMetadataDeltaRequest message.
message GetMetadataDeltaResponse {
  // This specifies the style used in the BlockMetadata sequence.
  // This value must be the same in all such messages returned by
  // the stream.
  // If block_metadata_type is FIXED_LENGTH, then the size_bytes field
  // of each message in the block_metadata list MUST be constant.
  // This field is REQUIRED.
  BlockMetadataType block_metadata_type = 1;

  // This returns the capacity of the underlying volume in bytes.
  // This value must be the same in all such messages returned by
  // the stream.
  // This field is REQUIRED.
  int64 volume_capacity_bytes = 2;

  // This is a list of data range tuples.
  // If the value of max_results in the GetMetadataDeltaRequest message
  // is greater than zero, then the number of entries in this list MUST
  // be less than or equal to that value.
  // The SP MUST respect the value of starting_offset in the request.
  // The byte_offset fields of adjacent BlockMetadata messages
  // MUST be strictly increasing and messages MUST NOT overlap:
  // i.e. for any two BlockMetadata messages, A and B, if A is returned
  // before B, then (A.byte_offset + A.size_bytes <= B.byte_offset)
  // MUST be true.
  // This MUST also be true if A and B are from block_metadata lists in
  // different GetMetadataDeltaResponse messages in the gRPC stream.
  // This field is OPTIONAL.
  repeated BlockMetadata block_metadata = 3;
}